I am looking sure how to explain what I need properly but I am looking for the set up that makes the hood pop up when the release is activated. I have the spring on the hood now but I believe I am missing the spring base that comes into contact with the radiator upper support cover.
i think that was still with the 71 sedan parts car in el paso last time i was there. remember looking at the radiator support, trying to figure if it was worth buying. (had some cancer under battery tray area) remember i unbolted latch support from rad support and threw it in the trunk. if you cant find one sooner i may be going mid week next week. dave las cruces
That's all there is to it- just the spring. The spring rests against the radiator support top plate and makes a nice letter "E" mark in the paint
find one of those fridge magnets - the ones that usually have a car picture on it. peel the image layer and place the mag portion on the rad support where the spring makes contact upon closure of the hood. saves the paint.
Thanks guys, Repainted the support and the spring, which apparently never sits in the same spot when the hood is down destroyed the paint. :af: