Has anyone actually installed a pair of the Allstar 57802 & 57803 Deluxe Front Lower Control Arms? I recently purchased Global West Upper arms and they have all the geometry corrections built into them. According to Doug at Global West their Lower Arms are manufactured to OEM geometry so all the change is done in the upper arms. I have been looking at the Allstar Deluxe arms and by the time I load New Moog ball joints as well as a New Global West Del-A-Lum Delrin bushing kit into them I will be saving $300.00 over the Global West arms, plus the Allstar's claim to have a larger spring pocket. But I'm not sure if the Allstar's are built well or not. So if anyone has them installed on their car I would be interested in hearing from you. Larry
I have not used those but I do know the lower tubular arms are not lighter than the factory ones. Are your factory ones worth cleaning up and loading with the good bushings and ball joints? For less $200 you can probably get your old ones hot tanked and be good as new if they aren't wallowed out. I bought an inexpensive set off ebay and put a moog ball joints in them and have had good luck but they are a few pounds heavier than stock and unsprung weight. I'm curious to hear how it turns out.
