American Autowire?

Discussion in 'Sparky's corner' started by deluxe68, Jan 8, 2019.

  1. deluxe68

    deluxe68 Well-Known Member

    I've seen a few threads on this product with good reviews but no real part numbers on what was used.

    I'm looking at the Highway 15 or most likely the 22


    Anybody have good results with this universal set?
    How about box mounting, same as factory or another location?
  2. jaye

    jaye Well-Known Member

    I've used Auto wire on a ford & Chevy truck with no issues, I removed all wires from the vehicles before beginning; I also laid out the harness on the floor and zip tied into sections once the fuse box id located I pulled the wires to their respective locations i.e., dash, under hood, tail light, etc, then picked a section and wired until completion. Just make sure you don't put your ground wires together gauges will bleed over. I would put the fuse box slightly to the side of the original location so your wire can exit where the bulkhead was.

Share This Page