Buick 300 Parts Wanted

Discussion in 'Cars wanted' started by aznriceninja, Mar 20, 2020.

  1. aznriceninja

    aznriceninja Member

    Hi all I am new to the forum and am looking for some parts for a Buick 300
    -Power steering pump and bracket
    -Alternator and bracket
    -Crankshaft- my buddy finagled the original crankshaft for a Rover 3.9 stroker and is selling the block and other parts for cheap

    I’m located in California and finding 300 parts whether aftermarket or OE is almost impossible to find. Any help is greatly appreciated.

    thanks all
     
  2. 197064buickspec

    197064buickspec 1964 Special Post-455

    I may have an alternator here....does your car have a/c? There are different alternator brackets for a/c cars.

    I have the front bracket arm for the top for non a/c.

    I have a back side bracket support for the power steering.

    Just an fyi if you don't have a/c any buick 300, 340, 350 , 400, 455 has the same aluminum alternator bracket. You can buy them reproduction.
     
  3. V6 non AC is also the same
     
  4. BigBlocksRule

    BigBlocksRule Well-Known Member

    I have the following stuff (and maybe some other things not on the list), let me know if you have any interest, thanks.

    '66 radiator cover plates - fresh paint - $25 each
    '66 300 valve covers - fresh paint - $25
    '66 300 fan fresh paint - $25
    '66 300 Pulley part #1359065 - fresh paint - $15
    '66 300 2bbl intake manifold #B1375561G 4 - $25
    '66 300 Head - $25
    '66 cowl upper cover plate - $50
    '66 glovebox and door - $25
    '66 radiator lower cushions and brackets - $35
    '66 front sway bar mounts and cushions fresh paint - $20
    '66 300 frame pads and motor mounts fresh paint - $50
    '66 300 pushrods - $10 for all
    '66 300 Thermostat housing-fresh paint - $20
    '66 300 water pump - $10
    '66 300 distributor (part # 1111147 6D) - $20

    '66-67 Soft-Ray tinted glass windows (both triangular vents, both doors, both quarters) - $350 for the set
    '66 Trunk - $100
    '66 Hood - $100
    '66 Hood (stripped and e-coated) - $300
    '66 Drivers fender (stripped and e-coated) - $300

    I know I also have a bunch of extra wheelwell and lower rocker and window trim, but I really need to get my car back together first before I sell any of that stuff. I probably also have some other stuff I can't even think of, so if there is stuff you are looking for just let me know and I'll see if I have it. If you would like more info or pics of any of the stuff listed above, just PM me and we'll go from there.

    Package sets are always a better price, and the more stuff the better the deal. Let me know, thanks!
     
  5. Nick 66 Skylark

    Nick 66 Skylark Well-Known Member

    Shoot me a picture of the thermostat housing.
     
  6. BigBlocksRule

    BigBlocksRule Well-Known Member

    Sent you some pics, just wanted to follow up to see that you got them, thanks.
     
  7. robert caris

    robert caris Well-Known Member

    I have a good 1966 300 crank for 100 plus shipping, that might be a lot I live in ohio.
     
  8. Cbacon67gs

    Cbacon67gs Member

    I've got a 300 crank and probably all the brackets you need. I may have the power steering pump but not sure. Have to look through my pile of parts. I know I don't have the alternator. I am in California not far from LA.
     
  9. jhonjhon

    jhonjhon Well-Known Member

    I have a cast iron 4 barrel and the correct Carter 4 barrel that should fit it for sale. Carb needs to be rebuilt and has a broken choke housing
    I'd like $375.00 plus shipping. PM if interested thanks, john
     

Share This Page