BuickRat1 VP Converter

Discussion in 'Buyer/Seller Feedback' started by johnriv67, Oct 21, 2018.

  1. johnriv67

    johnriv67 Well-Known Member

    Great guy to deal with and helps you get the part you need. Doesn't lie at all in the description of the part.

    One word of advice to him, don't duct tape the input shaft of the converter or the fluid + duct tape will turn the whole concoction into a big blob of chewing gum conistentcy tape. I used a torch to clear that crap off. It was the only way
  2. Buickrat1

    Buickrat1 Well-Known Member

    Sorry if that is the way it came to you. I trained the converter as much as I could. I put a HD paper towel in the snout and closed it off with Duct Tape on the outside of the converter shaft so what fluid is left does not soil the Box I shipped it in. Sorry for the inconvenience, I have never had your issue happen before.
  3. johnriv67

    johnriv67 Well-Known Member

    No worries, once again thanks for the converter! Sorry for my incompetence, I hope no feelings were hurt

Share This Page