Can anyone ID this Cam? In a 455 older build. Called TA Performance but they said their cams were stamped with full part number. Thanks!
How old is that cam? I Wouldn't be surprised that's one of there early cams clearly says Ta 118 on it.
X2 KB 118 cam : in the late 80s a build a 73 small head 455 stock re-ring with new bearings 118 cam 70 stage one carburetor, fuel pump , stock intake, headers, Bone stock turbo 350, 293 gear Posi, Car ran 1360s at 101 MPH Would finally shift into third gear going through the lights.
Sandy's X has the 118, motor rebuilt in 1990, with iron manifolds and heads ran a best of 12.78 at 106.Drives anywhere.
The cam is installed in an older build that I got from an engine builder in Georgia....not many miles on it. 1972 block and Stage1 iron heads, Poston S-divider intake. Ran on the dyno and had 463 ftlbs and 417 hp. Swapped out a 350 in a 71 Skylark. Trying to figure out how to modify my existing 750 CFM carb to make the engine happier.
Find yourself a 71 through 73 800 CFM Quadra jet contact Ken at every day performance he's a board member here on the board I'm sure he could set your carburetor up correctly for your combination.