Cordless drill

Discussion in 'The Bench' started by Mart, May 16, 2018.

  1. Mart

    Mart '71 350 GS, almost stock

    Had a few holes to drill while I was at the second home. Wouldn't cha know it, all my drills were back at the other house, so I had to resort to the original cordless......:D
     

    Attached Files:

  2. Dwayne B

    Dwayne B Well-Known Member

    I got one of them old drills,I used it last fall to lash the valves on my dump truck 292 head.I used A 1/4 in gas line ,put A drill bit in it and Chucked it in the drill ,stuck valve stem in the gas line. It worked really good,you could hear the grinding compound cutting.
     
  3. Taulbee2277

    Taulbee2277 Silver Level contributor

    How long does the battery last? :D
     
    rogbo and JoeBlog like this.
  4. 436'd Skylark

    436'd Skylark Sweet Fancy Moses!!!!!

    I should scare up a picture of an old two stroke drill motor used to tap trees. Those are cool. Even cooler are the back pack style drill motors. That's back when men were men.
     
    Nailhead Ronnie likes this.
  5. Mart

    Mart '71 350 GS, almost stock

    Can't seem to find one.... guess it must be one of those permanent types!
     
  6. StagedCat

    StagedCat Platinum Level Contributor

    That's the ol Armstrong model.....
     
    Nailhead Ronnie likes this.
  7. agetnt9

    agetnt9 Agetnt9 (Dan)

    My dad used that with a big wood bit to prepare scrambled eggs,, Ha
     
    Nailhead Ronnie likes this.
  8. 300sbb_overkill

    300sbb_overkill Well-Known Member

    If that thing has a 1/2" chuck you can use it to drill the oil passage out on your block!:D
     
  9. John Codman

    John Codman Platinum Level Contributor

    On average, about 75 years. :D
     
  10. DeeVeeEight

    DeeVeeEight Well-Known Member

    For you newbies that is called a breast drill because you put the butt of it against your chest and leaned in to it as you rotated the gears.
     
    Nailhead Ronnie likes this.
  11. 300sbb_overkill

    300sbb_overkill Well-Known Member

    Yes, but it can get VERY expensive to recharge that puppy sometimes!:eek::D
     
    Dwayne B likes this.
  12. yachtsmanbill

    yachtsmanbill Well-Known Member

    That hand drill needs a boob job...Interesting that the smaller version has a left hand drill bit ?? ws

    [​IMG]
     
  13. Mart

    Mart '71 350 GS, almost stock

    Guess I shouldn't show you guys a picture of my compressor then......
     

    Attached Files:

  14. Mart

    Mart '71 350 GS, almost stock

    20180517_210650.jpg Having a hard time getting the drill chuck to hold my bits....
     
  15. Nailhead Ronnie

    Nailhead Ronnie Well-Known Member

    Good one Mart
     
  16. dl7265

    dl7265 Gold Level Contributor

    Mine has been in the family since the 40’s . I love it ! B621F909-2442-4B0C-811F-7942AE0B61FF.jpeg
     

Share This Page