ALL IDEAS ARE WELCOME! I AM ABOUT TO PAINT MY COMPLETETED REBUILD. THE BLOCK IS ASSEMBLED COMPLETE WITH THE HEADS AND VALVE COVERS, OIL PAN ALSO. MY MAIN QUESTION IS WHAT IF ANYTHING SHOULD I USE UNDER THE PAINT ON THE BARE BLOCK?? SHOULD I JUST HIT IT WITH THE HIGH TEMP ENGINE PAINT? OR SHOULD I PRIME IT WITH HIGH HEAT PRIMER FIRST?? IS 500 DEGREE PRIMER ENOUGH?? IS IT POSSIBLE TO USE A PRIMER SEALER ?? THE BLOCK AND HEADS WERE HOT TANKED SO EVERYTHING IS CLEAN....IDEAS?
