F-41 Parts

Discussion in 'Parts wanted' started by '72 Skylark Custom 4bbl, Nov 9, 2018 at 4:25 PM.

  1. '72 Skylark Custom 4bbl

    '72 Skylark Custom 4bbl Active Member

    Hey everybody. Looking to see if anybody has a set of the boxed rear control arms & a rear swaybar for a '72 Skylark.

    Going from a 350 to a 455. So I'd like to upgrade the rear suspension. Will be going with Bilstein shocks all around, 455 springs up front, rear springs that will work well with the F-41.

    Also if not located in Denver area shipping to 80233.

    Thanks
     
  2. 436'd Skylark

    436'd Skylark Sweet Fancy Moses!!!!!

    Ive got a rear bar from a 72 GS. 140 plus the shipping from vt. I have the front as well.
     
  3. BrianTrick

    BrianTrick Brian Trick

    You should also get the rear frame braces.
     
  4. Note 1970

    Note 1970 Well-Known Member

    I've got a set of the rear frame braces if needed. 45 plus shipping
     
  5. '72 Skylark Custom 4bbl

    '72 Skylark Custom 4bbl Active Member

    What condition are they in? I don't need them to be perfect but not looking for super rusted either.

    Any idea on the shipping cost for the frame braces?

    Zip 80233.
     
    Last edited: Nov 10, 2018 at 10:56 AM
  6. '72 Skylark Custom 4bbl

    '72 Skylark Custom 4bbl Active Member

    Now if I could only find those boxed lower control arms....;)
     
  7. Note 1970

    Note 1970 Well-Known Member

    They should be fine when blasted. I wold think 15$ would cover shipping
     
  8. '72 Skylark Custom 4bbl

    '72 Skylark Custom 4bbl Active Member

    Sounds good.

    Any possibility I could get a pic or two?
     
  9. BrianTrick

    BrianTrick Brian Trick

    If your existing lower arms are nice,I have the correct inserts to make yours boxed like the factory.
     
  10. '72 Skylark Custom 4bbl

    '72 Skylark Custom 4bbl Active Member

    Brian, I'm thinking that I may just get the new control arms. I can weld, but I'm not that great at it. Plus they already come with new bushings & are ready to go. Probably get new hardware from ToddGS.

    Do you have anymore plans on re-doing anymore rear ends? I saw your last run but missed out.
     
  11. BrianTrick

    BrianTrick Brian Trick

    I have one 8.5” core that I am stripping right now,and it is not spoken for yet. This will be the last one until spring.
     
  12. '72 Skylark Custom 4bbl

    '72 Skylark Custom 4bbl Active Member

    Can I get some info on what you offer when you get a chance?

    You can PM me or whatever works.
     
  13. Redmanf1

    Redmanf1 Gold Level Contributor

    I think I have an extra set of boxed control arms. Also maybe a 7/8" and or a 1" rear sway bars. Send me a PM if interested and I will look in my storage.
     

Share This Page