Front coil springs and manual gear box

Discussion in 'Parts wanted' started by Bens99gtp, Jan 21, 2020.

  1. Bens99gtp

    Bens99gtp Well-Known Member

    Looking for some cheap coil front spring to fit 70 a body

    Also need manual gear box with pitman arm

    These are just needed to get a project to be rolling around the shop......dont need to be thr best quality and the closer to mr the better

    I live I middle ohio

    Please let me know what you have and asking price shipped....if close enough I can just come pickup

  2. Rocket Racer

    Rocket Racer Well-Known Member

    I have both and can ship if you don't find anything closer. Or maybe you know someone coming down here to avoid the Great White North! If interested, email me direct: Thanks, bob.
  3. Bens99gtp

    Bens99gtp Well-Known Member

    Bob let me know what you want for the parts shipped to 44875. You can pm me directly if you want
  4. jonmil

    jonmil Well-Known Member

    I have a gear box good cond but don't think I have the pitman arm $40 Detroit if that helps
  5. Bens99gtp

    Bens99gtp Well-Known Member

    If it's not too much trouble and if you have time, can you see what shipping might be, I see on evil bay many boxes are being shipped for 20-25 bucks, if that's the case it will be cheaper still to ship it when I figure driving
  6. BrianTrick

    BrianTrick Brian Trick

    I have rebuilt manual steering boxes with the arms.
    I have a few sets of springs,but if you just need something to stick under there,I can come up with something.
  7. Bens99gtp

    Bens99gtp Well-Known Member

    Dont need anything special or specific, just something to hold it up so it rolling
  8. BrianTrick

    BrianTrick Brian Trick

    I can do that. As for the steering boxes,all of mine are rebuilt
  9. Bens99gtp

    Bens99gtp Well-Known Member

    Ok understand, right now we dont need anything that nice, but if you have a pr of springs let me know the price shipped,
  10. got_tork

    got_tork Well-Known Member

    Brian what Do you get for your boxes?
  11. BrianTrick

    BrianTrick Brian Trick

    $225.00 for the rebuilt steering box,pitman arm,and shipping.
  12. Bens99gtp

    Bens99gtp Well-Known Member

    That's a good price......
  13. 71bskylarkk

    71bskylarkk Vroom Vroom.

    I have a set of nice springs that have been powdercoated gloss black. 50 for the pair plus shipping.
  14. got_tork

    got_tork Well-Known Member

    Brian Trick pm me please.
  15. Bens99gtp

    Bens99gtp Well-Known Member

    Gear box found, thanks jonmill. Still hunting cheap cheap spring . I can get a generic set new fro. Evil bay for 65 shipped. Since I dont need anything specific I might go that route if nothing turn ups
  16. '72 Skylark Custom 4bbl

    '72 Skylark Custom 4bbl Well-Known Member

    I have an AC set I took out of my ‘72. Can have them for price of shipping. I was just going to scrap them.

    I live in CO though so a bit of a distance away.


    Attached Files:

  17. Bens99gtp

    Bens99gtp Well-Known Member

    Can you get me an idea of shipping to 44875???
  18. '72 Skylark Custom 4bbl

    '72 Skylark Custom 4bbl Well-Known Member

    FedEx-$45 ground, UPS-$47 3 day ground, & USPS-$53 retail ground.

    These are just ballparks as I did their online quote calculator but I'd think they'd be fairly close.

  19. Rocketscientis

    Rocketscientis Well-Known Member

    Springs in Lansing Michigan
  20. BrianTrick

    BrianTrick Brian Trick

    If you are literally just going to roll it around a shop,and have no engine in it,you really don’t even need springs. I’ve used some steel sleeves and even some wood. Nothing to brag about,but enough to make it roll.

Share This Page