Heater control valve placement?

Discussion in 'The Big Chill' started by Mike Jones, Jun 28, 2019.

  1. Mike Jones

    Mike Jones Platinum Level Contributor

    Could someone post a pic of the factory correct placement of the heater control valve on a 455 with A/C? I have seen pics with a few different locations. Thank you
     
  2. 12lives

    12lives Engage! - Jean-Luc Picard

  3. Mike Jones

    Mike Jones Platinum Level Contributor

    Perfect, however. Are heater valves with the rubber i sulator available? And what about the insulator and strap for the hoses? I will purchase a strap from you, do you sell the round insulator/ cushion piece also?
     
  4. Duane

    Duane Member

    I reproduce the rubber insulator that goes around the hot water valves. If you are interested I would have to see what I charge for them once I get home.
    Duane
     
  5. Mike Jones

    Mike Jones Platinum Level Contributor

    Thanks Duane, I just ordered one on line. If it doesn't fit I will get with you.
     
  6. Mike Jones

    Mike Jones Platinum Level Contributor

    Thanks 12lives for passing on the post.
     
  7. Briz

    Briz Platinum Level Contributor

    Did you get the coolant leak straightened out?
     
  8. 12lives

    12lives Engage! - Jean-Luc Picard

    You can have the strap - I had to buy a dozen! PM me your addy. The other pieces are available on line. (Duane - didn't know you are selling those - we need a list!)
     
  9. Mike Jones

    Mike Jones Platinum Level Contributor

    Yes, put a new TA timing cover and water pump on. Also degreed the cam first.
     
    Briz likes this.
  10. 12lives

    12lives Engage! - Jean-Luc Picard

    Best I could do - the line from the valve to the engine gets in the way so it won't lay down. IMG_20190629_143309_466.jpg
     
    Mike Jones likes this.

Share This Page