Help with b&m shifter

Discussion in 'The "Juice Box"' started by Donuts & Peelouts, Dec 30, 2017.

  1. Donuts & Peelouts

    Donuts & Peelouts Life's 2 Short. Live like it.

    Will this shifter from a 3speed 68 camaro be compatible with my FUTURE Swith pitch th400?
     

    Attached Files:

    Donuts & Peelouts, Dec 30, 2017
    #1
  2. OHC JOE

    OHC JOE Mullet Mafia since 2020

    I believe so
    Should work the same
     
    OHC JOE, Dec 30, 2017
    #2
    Donuts & Peelouts likes this.
  3. schlepcar

    schlepcar Gold Level Contributor

    Think so too...but you need the bottom bracket and lever bolted in place to adjust cable properly. If it was previously on a 350 turbo the bottom bracket may need some modification.
     
    schlepcar, Dec 30, 2017
    #3
    Donuts & Peelouts likes this.
  4. Donuts & Peelouts

    Donuts & Peelouts Life's 2 Short. Live like it.

    Thanks Guys, with this type of shifter would i be having to manually shift into 2nd & 3rd all the time?
     
    Donuts & Peelouts, Dec 30, 2017
    #4
  5. Briz

    Briz Founders Club Member

    That would depend on the valve body in the trans. If its unmodified the shifter will perform like stock. 3 or D should be drive. If its had a manual valve body installed then you will have to shift 1-2-3 every time.
     
    Briz, Dec 30, 2017
    #5

Share This Page