How to mount a grill with broken studs?

Discussion in 'Color is everything!' started by dr, Dec 20, 2004.

  1. dr

    dr Well-Known Member

    I just picked up a nice '70 Skylark Grill but the mounting studs are broken. What have you folks done to mount a grill with broken studs? I do not have any of the studs. Any suggestions?
     
    dr, Dec 20, 2004
    #1
  2. Nicholas Sloop

    Nicholas Sloop '08 GS Nats BSA runner up

    Place a correct size bolt (5/16", IIRC) in the correct location and build up a mound around it with an epoxy putty
     
    Nicholas Sloop, Dec 20, 2004
    #2
  3. slomo

    slomo MY NAME IS JOE

    I would try to tap new threads in the tower and if that doesent work try JB weld.
     
    slomo, Dec 20, 2004
    #3
  4. dr

    dr Well-Known Member

    Thanks, guys, sorry I never responded or said thank you sooner. I will give it a shot
     
    dr, Jan 17, 2005
    #4
  5. Steve Craig

    Steve Craig Gold Level Contributor

    I have the same issue. Found 2 mounting posts from another car. My plan is to mount the grill with the 4 good studs. Shape/file/fit the two donor pieces to a position as they mate up & the grille sits straight. Gently clamp the grille, with the donor pieces, to the rad. support. Clamp will be put between the rear of the grille & the front of the rad. support/cover. Sandwich the stud onto the mounting position.
    While the epoxy/bonding agent sets up the grille should remain in the right position.
     
    Steve Craig, Jan 18, 2005
    #5

Share This Page