looking for 1970 buick convertible dash skylark or gs complete and rear bumpers

Discussion in 'Cars wanted' started by Mike Terdic, Oct 19, 2019.

  1. Mike Terdic

    Mike Terdic New Member

    call mike 8159541893 complete convertible dash and rear bumper
     
  2. flynbuick

    flynbuick Super Moderator Staff Member

    Except for the addition of the top switch and plate, they are all the same. The bumpers are the same.

    Ask Todd on this Board about the PP’s reproduction. It is close to the original.
     
    ToddsGS likes this.
  3. Mike Terdic

    Mike Terdic New Member

  4. flynbuick

    flynbuick Super Moderator Staff Member

    Todd is a dealer. They are reproducing bumpers also but I am unsure of the status.
     
  5. flynbuick

    flynbuick Super Moderator Staff Member

    ToddsGS is his Board name.
     
  6. flynbuick

    flynbuick Super Moderator Staff Member

    70s are complicated by the midyear change of the instrument lens from pointed to flat. There was a used 70 cluster under the parts wanted section.
     
  7. gsfred

    gsfred Founders Club Member

    I have used cluster housings and used bumpers. Location would help as shipping bumpers is expensive. PM me if interested.
    Fred
     
  8. wovenweb

    wovenweb Platinum Level Contributor

    The bumper from a base model Skylark will not have the holes drilled for the Buick nameplate across the back. Yes, I know, easy to add.

    And yes, a Skylark convertible implies Custom(350)/GS(455) only.
     
  9. Dan Healey

    Dan Healey Well-Known Member

    Why don't you move this to the "Parts Wanted" section???
     

Share This Page