Looking for a gear indicator clip

Discussion in 'Parts wanted' started by Rich Skylark, Jun 7, 2020.

  1. Rich Skylark

    Rich Skylark Gold Level Contributor

    The clip connects the gear Indicator needle on the bottom of the cluster to the steering column . When the car is placed in R N D L2 L1’, the needle will point to the year or park that the car is in . My car is a 68 skylark. The clip is highlighted in the photo .... thanks guys
     

    Attached Files:

  2. BrianTrick

    BrianTrick Brian Trick

    I have a small assortment of those in my cabinet at work,but I won’t be there until Tuesday. If you don’t find one until then,let me know.
     
  3. BrunoD

    BrunoD Looking for Fast Eddie

    Hi Rich,just send me your address,I'll send you one of those,unless you can pick it up..Bruno.
     
  4. Utah455

    Utah455 Platinum Level Contributor

    Hey guys, I’ve been trying to figure this out as well. I don’t have those pieces either but I don’t understand how it works with a console shift car. How does the console shifter for automatic trans move the gear selector on the dash?

    Thanks
    Nick
     
    Last edited: Jun 7, 2020
  5. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    If you look at the column while you are moving the gear shift, you'll notice that the lower bowl of the column rotates. That clip screws into a slot in the bowl, and moves a spring loaded indicator that is part of the speedometer.
     
  6. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    You have to remove the small panel under the column to see the attachment. It's adjustable by moving the clip in the slot. What happens most often is people forget to detach the link when they lower the steering column, and it breaks.
     
  7. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    The back drive rod is what moves the column bowl.

    BackDriveShiftLinkageR.jpg

    BackDriveAdj.jpg
     
  8. Utah455

    Utah455 Platinum Level Contributor

    Hey Larry, I see how the column shift rotates the steering column which will move the gear selector. But I have bucket seats with the center console shifter, I don’t see how the center console shifter will engage that gear selector in the Speedo.
     
  9. Utah455

    Utah455 Platinum Level Contributor

    @LARRY70GS
    Ok, I see your picture now. I guess I need to find these rod and bracket linkage setup now which bolt up between the automatic trans and steering column.

    Thank you again for the info!

    4D82627E-3696-4070-BEF7-F225E40DF75C.jpeg
     
  10. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    Yes, that should have come with the car.
     
  11. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    Give BrunoD a PM. I bet he has plenty of them. Send him my picture.
     
    Utah455 likes this.
  12. Utah455

    Utah455 Platinum Level Contributor

    Hey @BrunoD see above for picture. I’ll send you a PM. Thanks Nick
     
  13. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    You know how to PM someone, right?
     
  14. Utah455

    Utah455 Platinum Level Contributor

    Yeah. Just sent PM to Bruno now. Wife dragged me to Walmart for shopping. Fun times. :)
     
  15. BrunoD

    BrunoD Looking for Fast Eddie

    Well,from that picture,mine are not the same,as they curve almost 10 inches from the bottom.Larry,if you look at yours,they are the same as mine.I do not have any that are straight.I just got one out of the GS 350,and its the same as the few that I saved,OK,I just saw the first picture,that's what I have.Bruno.
     
  16. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    I'm not sure about them Bruno. They may differ between column and floor shifter models.
     
  17. BrunoD

    BrunoD Looking for Fast Eddie

    Hi Larry,fromthe fist picture.mine are the same.also they are the same for both floor shift or column shift.Look at yours,its the same as the first picture,and the one from the GS 350 its the same ,and its a column shift car.Bruno.
     
  18. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    Well, that's good.
     

Share This Page