March Performance Serpentine in A G-Body

Discussion in 'V-8 Buick Powered Regals' started by ve3oky, Oct 15, 2012.

  1. ve3oky

    ve3oky Member

    I'm in the planning stages of dropping a 69 Buick 430 in my 1980 Regal. I noticed March Performance has a kit for them ( http://marchperf.com/styletrack_buick.html ) and emailed asking them if there would be issues. They said it wont fit, anyone know why off hand?? Worst case I can tell is maybe a power steering issue, but the kit can be ordered with out it .. Anyone know what I'm missing?? before I email that make and ask "whyyyyyyy??" thanks
     
  2. regal81455

    regal81455 Well-Known Member

    Not sure why it wouldn't but if you can get your hands on used GN accessory setup you can go that route for sure. Thats what I did ( cost about $500 +/- ) when I was done. Looks good, functions well, and is WAYYYYY cheaper than the march setup.
     
  3. Briz

    Briz Founders Club Member

    I WANT this! Only diff is that I want to add a pro charger to the Riv.
     
  4. regal81455

    regal81455 Well-Known Member

    The GN setup would be ideal for supercharger setups...it leaves the entire passenger side open for mounting. Then all you would have to do is work out the pulley setup from the charger to the crank ( maybe custom pulley at that location??? )
     
  5. ve3oky

    ve3oky Member

    Ahh yes, I forgot about that route. I need all the accessories as why the March setup just seems so good, but it is a ton of $$. There any special modifications or year GN requirements I should be looking at when looking for the parts?
     
  6. regal81455

    regal81455 Well-Known Member

    Nothing special to look for just needs to be from the 86-87 models and you'll need it all ( including the p/s pump and rezzy ). The guys over at turbobuicks.com will be able to help you out. Thats where I got my setup from.
     

Share This Page