going to install a meth/water injection kit and wanted to see what company you guys like. any installation /tuning tips would be great. I am running 12 psi boost and my nailhead is running like real strong. Thanks Paul
ALKY CONTROL or AIS, all others arent in the same league. ALKY CONTROL is a huge Buick Supporter and Racer id spend my money with him and will be very soon. His customer support is second to no one. AIS has a very durable system as well and good customer support. Stay away from Snow, AEM etc there pumps aren't the same and DO NOT use windshield washer fluid. I always ran pure meth in my GN as do.lot of other regal guys but water/meth works just fine also. As far as tuning tips go They will help with all that based on what they know to work but basically you want it to progress in fairly quick and smooth to much to quick and it will bog at your boost level you shouldn't have any real tuning issues
I use an AEM injection system with a Devils Own 3 gallon tank. The nozzles are a bit limited and bulkier than what you can get with the AIS systems but it still works great.
Thanks guys.. I just purchased the dual nozzle AIS trunk mounted setup. $575 insurance in my mind. looking to hit Thompson speedway road course at the end of the month and want a little insurance. I will let you know how the setup is and ease of installation. can I run steel brake lines instead of plastic lines? I forgot the name of the metal but they are a goldish color of hard line. . I wouldn't think they would rust like a conventional line. Paul
The copper mix line I think your referring to may not jive well with the meth im not sure, id use -4 stainless its cheap easier to route and plenty tough,quick disconnect nylon hose is convenient but admittedly isnt very attractive,durable or like making turns
I will be most likely hard line -4an stainless. I have a very nice hydraulic flaring tool and I just do not like quick disconnects. they are convienent but always fail at the wrong time. Paul