Mounting the condenser

Discussion in 'The Big Chill' started by Timonator, Apr 11, 2014.

  1. Timonator

    Timonator Silver Level contributor

    I just got a condenser for my car and I was wondering if anyone could help me figure out how to mount it. Pics or diagram would help. I bought it off of ebay. It has clipds on the top as if the bolts would go straight down through the upper tie bar but I know that's not correct, and the bottom I am complete clueless as to how that mounts.
    Thanks , Tim
     
  2. mrolds69

    mrolds69 "The Cure"

    I've been messing with my condenser today, also. I assume you have a factory AC car. At the top of the core support, there should be a brkt on each side that extends like 2-3 inches towards the rad. That's how the top mounts. There are no real mounts for the bottom. There were 2 rubber coated clips that clamped to the bottom of the core support. The condenser brkts should be slotted at the bottom, the slots slip over the clips. Then 2 bolts thru the top brkts hold it there. Who's condenser did you buy off ebay? I see several places selling them.
     
  3. Timonator

    Timonator Silver Level contributor

    It was from ccs auto parts
     

Share This Page