N-25 exhaust hangers, 71-72 GS

Discussion in 'Repro Parts' started by UNDERDOG350, Jul 29, 2015.

  1. UNDERDOG350

    UNDERDOG350 350 Buick purestock racer

    As most know I have been making these tailpipe to bumper hangers for 25 years. As the demand has been dropping for several years I am thinking of making 1 last run of these before I stop making them.
    Prices will remain at $130 for stock size (will also work with 2 1/4" pipes) and $150 for 2 1/2". I will no longer make 3"
    These are the same sets I've been making with 409 stainless steel shell and zinc plated "L" bracket and rivets.

    Please respond here with your intent to purchase and when a quantity is known I will provide a projected delivery date.

    Thanks
     
  2. Buickone

    Buickone Founders Club Member

    Steve I REALLY need a 3" set, is there any possibility of getting these??
     
  3. Racerx88

    Racerx88 Platinum Level Contributor

    Steve, are you still rebuilding the stock hangers?
    I've got a couple sets I should get done.
     
  4. UNDERDOG350

    UNDERDOG350 350 Buick purestock racer

    Yes still rebuilding as long as I have parts.

    Really don't want to make 3". Just too much work.
     
  5. Goose1970-72

    Goose1970-72 Silver Level contributor

    If this is the last run...then i would be interested in four stock sets...
     
  6. JCP

    JCP Well-Known Member

    I would be in for a 2.5 inch set.
     
  7. N360LL

    N360LL milehi71Stage1

    Steve,

    Count me in for 2 sets of 2.5" tips and hangars. And maybe one set of stock as well.
     
  8. UNDERDOG350

    UNDERDOG350 350 Buick purestock racer

    I don't make the tips, just hangers.
     
  9. Hawken

    Hawken Hawken

    Steve,

    I will take a set of 2.5" hangers.
     
  10. GRNDNL

    GRNDNL Wannabe

    I'm in for 2 sets of 2 1/2"
     
  11. Buickone

    Buickone Founders Club Member

    I'm in for a set of 2 1/2
     
  12. UNDERDOG350

    UNDERDOG350 350 Buick purestock racer

    Anyone else?
     
  13. MullyClu

    MullyClu Well-Known Member

    I'll take a set of stock sized hangers
     
  14. breakinbuick11

    breakinbuick11 Platinum Level Contributor

    How hard to modify 2.5 tips to 3? I would be in for a set of 2.5 regardless.
     
  15. UNDERDOG350

    UNDERDOG350 350 Buick purestock racer

    Anyone else?
     
  16. UNDERDOG350

    UNDERDOG350 350 Buick purestock racer

    OK i got 5 maybe 6 sets of stock size, 6 sets of 2 1/2" and I got Louie and Jerry wanting 3".

    Anyone else?
    Steel order going out Friday.
     
  17. jim

    jim Well-Known Member

    I need a set of 2.5 Please
     
  18. 1971GSFAN

    1971GSFAN green onions

    What is involved in rebuilding a set? I need a set, should I replace or rebuild mine? Going on your advise.
    thanks
    Tim
     
  19. breakinbuick11

    breakinbuick11 Platinum Level Contributor

    Hi Steve, if 3" are not possible, I'm fine with 2.5.

    Thanks,
    Louie
     
  20. CWilly

    CWilly Owner of "The Money Pit"


    I'll take a stock set.
     

Share This Page