need choke rod for divorced choke for 2 barrel 2g 7042142 carb

Discussion in 'The Venerable Q-Jet' started by john Bryant, Mar 25, 2020.

  1. john Bryant

    john Bryant Member

    need rod coil to carb john 817 368 4941
     
  2. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD"

    That might be very difficult to find. You can make one with a metal coat hanger.
     
  3. BuickV8Mike

    BuickV8Mike SD Buick Fan

    Or another one close.
     
  4. Cliff R

    Cliff R Well-Known Member

    Coat hanger will work but the wire diameter of a coat hanger is to smaller than the OEM metal rods.

    Go to your local welding supply store and get some aluminum TIG rod in the correct diameter. It bends much easier than steel rod and you can make very sharp bends without heating it up........Cliff
     
    BuickV8Mike likes this.
  5. john Bryant

    john Bryant Member

    thanks will try
     

Share This Page