March 8&9, 2014 are the new dates for the Dave Morgan chassis seminar. Please see below DAVE MORGAN CHASSIS SEMINAR The Dave Morgan chassis seminar will be making a return visit to Westchester County, NY on the new dates of March 8 & 9,2014. This is a 2 day class for $170 and it is worth every dollar! The class will cover all aspects of suspension setups from stock to full racecar as well as state of the art Hunter 4 wheel alignment machine. Saturday will be classroom learning from 9am till 8pm with some on car tweaking and then Sunday those that bought their cars will be scaling and setting them with the entire class participating all day! Bring your tools and working clothes because this is hands on! The class will be held at the Auto Center @ Chappaqua Crossing in Chappaqua, NY and you must call ASAP as seating is limited to around 25. Those that wish to bring cars better sign up early as will only have time for probably 7 or 8 cars on Sunday. The 2014 racing season will be starting shortly so make sure you are ready! Again if you are interested please call my cell (914) 447-6068(John) or go to davemorganseminars.com. Remember to book with me ASAP to make sure your car is on the list to be checked out! A good race alignment costs about the price of this class so basically the class is free and you get to go through your whole car! Thanks, John Csordas
I just got to thank John Csordas again for hosting another great Dave Morgan chassis class. It was my 3rd time. 2nd at the auto center which in my book is the ultimate facility for this class. He personally put so much effort into these classes to make them run smooth. People really need to get to one of these classes and if your lucky it should be at the auto center. He was non stop today running from lift to lift helping everybody set up there cars, providing tools and use of the facilities. I love watching the Chevy or Ford guys faces when John helps them out with their issues that they haven't been able to figure out.. He's a real asset to this Buick community..
Thanks for the kind words Frank & thanks for helping with Jr's Skyhawk all day! You are the 4 link Guru here pal! Hopefully the Skyhawk will drive like a dream. Thanks for the use of your chassis scales at all these seminars. Those that missed the class all I can say is Dave Morgan knows his stuff.
I attended this class for the first time last weekend, and cant say enough about it. Dave Morgan is incredibly knowlegeable about chassis tuning, and the knowlege I gained and the work I was able to do on my car more than covered the cost of the class.... I was able to change the front/rear weight distribution, even my corner wieghts and compensate for my fat ass all on a stock car. I was able to get a race alignment and nail down the exact condition of my steering and suspension components (I've got to replace my lower control arm bushings) My rear control arms are straight and in great shape, but my drivers side wheelbase is 3/16th shorter because my LS axle tube and control arm mount has rotated rearward. And what I thought was a pretty good and stable alignment was really totally slowing the car down.... I also learned what was already working right on my car: I had virtually no suspsension bind which is pretty rare on any vehicle, and my frame (rusty as it is) is totally straight. And through pure luck, I had been jacking my suspension pretty close to optimal all these years without the benefit of corner scales on my prior race set up... If you're chasing 10ths at this point like me, this information is invaluable. Make time to take this course. Even better, take it at John's shop in Chappaqua NY, which is closer than you think. You will not find a more accomodating host. Additionally, I met many people from this board and the NE GS/GN club in person, and that was alot of fun too... I will be back next fall with my 73...Cant wait. Thanks again to John and Dave.
