OEM Carb Return Spring & PCV hose for 1970 GS

Discussion in 'Parts wanted' started by Brett Slater, Oct 11, 2018.

  1. Brett Slater

    Brett Slater Super Moderator Staff Member

    I saw a thread somewhere on Facebook last week about the spring but can't find it, so I'm wondering what people are using in terms of correct - or close to correct? I'm aware one would most likely need to be painted "John Deere- ish" green as well.

    Also, anyone have an extra PCV hose kicking around? The one that runs from the back of the intake around to the front of the Q-Jet? I know I could buy a new one but I like reusing old stuff that's still in good condition. Plus, this ain't not concourse car, so...

    Thanks in advance!
     
    BuickV8Mike and OHC JOE like this.
  2. BrunoD

    BrunoD Looking for Fast Eddie

    Hi Brett,I don't know if I have the spring,I might,as to the hose,I still have a couple NOS ones,just a matter of finding them,I put them away and then I forget where I put them.Bruno.
     
  3. Brett Slater

    Brett Slater Super Moderator Staff Member

    Hey Bruno,

    Let me know when you get a chance to look and thank you!
     
  4. Brett Slater

    Brett Slater Super Moderator Staff Member

  5. 41speciman

    41speciman Well-Known Member

    Brunno I could use a pcv hose if you have a extra thanks 41
     
  6. BrunoD

    BrunoD Looking for Fast Eddie

    Yes,I think I have a good used one,so far I have not found the box where I put them.I have been lookong,as I have promised to Brett.As soon as I find the box,I will tell you about it.Bruno.
     
    Brett Slater likes this.
  7. Brett Slater

    Brett Slater Super Moderator Staff Member

  8. BrunoD

    BrunoD Looking for Fast Eddie

    OK, I found the NOS parts,I have for sale 2 for a BBB and one for a SBB ,so -41- if you are interested ,send me a PM.One is for Brett ,if he still needs it .As to the used ones,I only have one,but its not original,different rubber but has the same shape.Another I have is for my car.Bruno.
     
  9. Brett Slater

    Brett Slater Super Moderator Staff Member

    Bruno - please PM me with a price and your address and I'll get a check out this week.
     
  10. ajesh35

    ajesh35 Well-Known Member

    Inline if it gets to me
     
  11. BrunoD

    BrunoD Looking for Fast Eddie

    OK ,let me explain,I want $25.00 for each one,plus shipping,they will fit in the small PO box,that costs $5.00.I can bend then to fit as they are very pliable.For Brett,I will take $20.00 plus shipping.41 has not responded with a PM,tomorrow Ajesh,if he wants it ,will be the other one,that is if Brett wants it.then there's one for a small block car.Bruno.
     
  12. Brett Slater

    Brett Slater Super Moderator Staff Member

    Bruno,

    Please check your PM. :D
     
  13. OHC JOE

    OHC JOE BUILDIN A 1970 GSX CLONE

    Post a pic of that hose also Brett when ya get it
     
    Brett Slater likes this.
  14. BrunoD

    BrunoD Looking for Fast Eddie

    Hi Brett,I will send it to you in a day or 2.Joe,there's nothing to see.These are original Buick,with the writing and also the # attached to them in paper,I sold half of them and then I forget I had them.When I saw Brett was looking for one,I remember it.These are as good as if they were made last week.Bruno.
     
    OHC JOE and Brett Slater like this.
  15. Brett Slater

    Brett Slater Super Moderator Staff Member

    Bruno,

    Just so we're clear, I'm pretty sure the '70 455 PCV hose is different than '71 and up.
     
  16. BrunoD

    BrunoD Looking for Fast Eddie

    As far as I know or remember,I got these for myself and I had 4 70 GS at that time.My wife,my 2 girls and my self all had a 70 BB GS,my son had a 71 S.I.Anyway,this is the number that comes with with the hose:1245526.Bruno.
     
    Last edited: Oct 17, 2018 at 6:02 PM
    Brett Slater likes this.
  17. Brett Slater

    Brett Slater Super Moderator Staff Member

    Sounds good! That's good enough for me.

    Thanks again!
     

Share This Page