out of the jaws of the crusher

Discussion in 'Junkyard Jewels' started by doug adkins, Jun 8, 2010.

  1. doug adkins

    doug adkins love my Buicks

    most of this car is here,yard had put on the list to be crushed.:bglasses:
     

    Attached Files:

  2. RACEBUICKS

    RACEBUICKS Midwest Buick Mafia

    Are you going to save it or part it out?? I might want to take a closer look at some of the trim if you part it. (first in line to see the trunk trim & steering wheel) :)
     
  3. 1967GS340

    1967GS340 Well-Known Member

    Good save!!

    Don't know if it's a re builder or a parts car but either way that car still has a lot to offer.

    It's in ugly condition, but looks more solid than many of the cars on the road in the Northwest.
     
  4. Dale

    Dale Sweepspear

    I'm shocked that the fender skirts are still with the car.
     
  5. Junkman

    Junkman Well-Known Member

    Factory am-fm radio,too. Rear might be a good ratio judging by the big a/c compressor pulley.
     
  6. doug adkins

    doug adkins love my Buicks

    its to far gone to fix,I will part it as soon as I can figure out what is good and prices
     
  7. pressdoctor

    pressdoctor Well-Known Member

    Second on steering wheel, contingent on shape
     
  8. cstanley-gs

    cstanley-gs Silver Mist

    That looks great with the skirts on it!
     
  9. Junkman

    Junkman Well-Known Member

    " Low rider"
     
  10. TODD'S 67

    TODD'S 67 Time for another Buick!

    Put me in line for the am/fm radio, battery tray, steering wheel, and trunk trim. Thanks!
     
  11. ubushaus

    ubushaus Gold Level Contributor

    Put me in line for the front grille tri-shield!
     
  12. 1ATony

    1ATony Well-Known Member

    The worst thing you can do is park a car in the grass like that.:rant:

    Looked like a pretty cool car at one point.
     
  13. ancientx

    ancientx horn/antler&bone carver

    How's the area around the windshield under the trim? I'd want the whole firewall, A-pillers and up to 4-5 inches of the roof.
    Same goes for the flat panel below the rear window.
    Also the fender heels and the lower quarters? If they're good put me in line.
    I'm interested in the skirts too, and the front and rear brackets, as well as the center flange that are required to mount the skirts, please.
    Let me know prices per.
    If somebody else wants the whole fender, let them have it.
     
    Last edited: Jun 13, 2010
  14. GS Jim

    GS Jim Platinum Level Contributor

    I'd also be interested in the clock if you're getting into it that far. I don't know what kind of trim pieces are on it but if no other pieces are spoken for let me know. Also could you send me a price for all i've asked for if it's available? Thank's. I'd also like the cross braces in front of the radiator.
    PONCH
     
    Last edited: Jun 9, 2010
  15. 197064buickspec

    197064buickspec 1964 Special Post-455

    I'm interested in the arm rests and chrome backing plates depending on condition. Also the radiator top hold down bracket. Please let me know your prices.


    Thanks

    Brian
     
  16. BillA

    BillA Well-Known Member

    If it's got a 300/340 I'm interested in the A/C compressor mounting bracket.
     
  17. doug adkins

    doug adkins love my Buicks

    I hope these pictures made it
     

    Attached Files:

  18. RACEBUICKS

    RACEBUICKS Midwest Buick Mafia

    Yea thats exactly like mine sorry but I will have to pass.
     
  19. DaWildcat

    DaWildcat Platinum Level Contributor

    Shouldn't this be happening under the "parts for sale" section?

    Devon
     
  20. doug adkins

    doug adkins love my Buicks

    sorry Devon it wasn't meant to be a sale post,I had PM'ed them but couldn't post pictures on the PM's. It will be on PFsale from now on.:Dou:
     

Share This Page