parting out 4 67 Skylark,Special and a convert

Discussion in 'Parts for sale' started by cole, Oct 4, 2011.

  1. cole

    cole Gold Level Contributor

    These are 4 67's that I am parting out,all are 2dr cars.Lots of trim bits,nice black interior $75 for the door panels,$75 for the rear arm rest/quarter window panels,good running 340/4bbl $400,convertible top assembly and pump work great $600 complete.Rear window trim $45 nice set,front widshield trim $45.Vinyl top trim complete $75.Please post with wants and I can get back to you with pictures,prices and shipping quotes,I just need your zip for that.Sorry no dash pads or wheel opening trim
  2. do you have a complete set of special door panels front and rear in black or blue?
  3. wacko212

    wacko212 Well-Known Member

    Any decent tail light chrome ? Also need right front door panel moldings. shpg to 04257 Thanks, Wacko
    Last edited: Oct 4, 2011
  4. scott kerns

    scott kerns Silver Level contributor

    How about a fuse block with decent lettering?

  5. Joe

    Joe Well-Known Member

    Interested in the trim for the trunk lid if not badly pitted. Also the chrome around the tail lights.
  6. TODD'S 67

    TODD'S 67 Time for another Buick!

    Steering wheels, am/fm radio, trunk trim.
  7. Chi-Town67

    Chi-Town67 Gold Level Contributor

    Looking for.........- Scratch free drivers door glass (tinted)
    - molded windshield washer hoses (from pump to nozzles)
    - acorn nuts for trunk molding
    - headliner windlace (if black)
    - inside front and rear window trim (if black)

    Shipping to 60638

  8. oldgoldbuick

    oldgoldbuick Silver Level contributor

    hi cole. I need rad x-braces, drivers side headlight door. Lighter socket complete with dash bezel. Shipping to coquitlam by greyhound like last time..... thanks. Stu
  9. 67GSFun

    67GSFun Johnny

    a good set of arm rest full panels From the skylark? A good fuse box?
  10. killrbuick66455

    killrbuick66455 Well-Known Member

    Interested In Rear Black Seat Maybe Front Seat Too Ship To 11731
  11. 67GSFun

    67GSFun Johnny

    a good set of rear panel arm rest from a skylark with no rotted metal..A good fuse block with decent lettering?
    Last edited: Oct 4, 2011
  12. TODD'S 67

    TODD'S 67 Time for another Buick!

    2nd on the battery tray!
  13. TODD'S 67

    TODD'S 67 Time for another Buick!

    Hey Johnny, didn't those panels you got from me work out?
  14. Couch

    Couch '67 GS400 Guy

    If the vinyl top trim on the red car is decent I would like that, and how about that fan shroud on the black car if it is in one piece? Let me know total shipped to 49113 or picked up (my sister lives in/near Abbotsford). Thanks, Mike.
  15. C.Rob

    C.Rob Well-Known Member

    Front seat.bench or buckets, Chris
  16. Houndogforever

    Houndogforever Silver Level contributor

    I could use the removable brackets that hold the rear fender skirts in. I have the weld-in center one, and either the fronts or rears, but I don't remember, so if you have both fronts and rear brackets, how much?
    Shipping to 97030
  17. cole

    cole Gold Level Contributor

    As usual the taillight trim all suck,the rh door panel is nice
  18. cole

    cole Gold Level Contributor

    Hi Joe
    Here are some trunk lid trims and as far as taillight trim see the reply to Wacko
  19. cole

    cole Gold Level Contributor

    Hi Todd
    Sorry no AM/FM,steering wheels are all cracked.See the trunk chrome pictures I posted,I think I have another 1 or 2 trunk chrome somewhere...........Cole
  20. cole

    cole Gold Level Contributor

    Here are the rear arm rests,nice and solid.Forgot to get fuse block picts.Will do this week

Share This Page