Parting out a 1965, 66 and 69 Skylarks

I found the hood letters in the glove compartment. The C and the K have one broken stud but will still work with the 1 good stud and the part of the broken stud that is still on them. There is peppering and a some pitting.

Here are the Rocker Moldings I consider these moldings to be in very good used condition and it comes with all the mounting hardware.

 

Are you still interested in the front bumper???

 

No, just the rear.The front may have more dings than I had hoped for.
Don

 

Do you have right and left door 16 inch armrest bases?

 

No I do not have any 16 inch bases. Which car were you referring to??

 

Hi
I'am looking for what hooks up to the horn bar wire in the steering wheel column, there's a round hole that something went in their to contact the horn. If the 66 still has the stock wheel on it if you unscrew the horn bar the wire should be hooked up to what I need. Mine didn't have anything under their when I got the car so I'am not sure what the parts would look like. Thanks Harle

 

I haven't taken the steering wheel off yet but I know it is factory. I'll get back to you when we get a chance to get to it. Probably this weekend. Thanks, Kimberly

 

I am interested in the rear quarters of the 66 especially the drivers side. If you have them can you take pictures of them. Thanks Dave

 

Sorry Dave but both sides are rusted out. Thanks, Kimberly

 

Re: Parting out a 1965, 66 and 69 Skylarks - 65 front bumper

Looking for front bumper for 65 skylark. Little confused on pics you posted, is the 65 front bumper posted? Can you describe condition and how much you are asking if still available?

 

Re: Parting out a 1965, 66 and 69 Skylarks - 65 front bumper

Good morning, sorry it took so long to get back to you but I do have the front bumper but it does have a couple of issues.
Two dents on the bottom, looks like someone pulled with a hook in picture three and then there is a split on the center top. I would take $60.00 plus shipping. Let me know if you would like to get it. Thanks, Kimberly

 

I need the L&R outer wheelhousing from the 69, are they in good shape?



Ricardo

---------- Post added at 11:45 AM ---------- Previous post was at 11:44 AM ----------

I meant to say the rear L&R wheelhousing on the 69.

 

Hi Ricardo, I think that they are in really nice condition. I will get some pics this evening and send them to you. Thanks, Kimberly

 

How's the body shell of that '66 ? Can I get pictures ?

 

I haven't finished parting it out yet. Its gonna be a while. If you want I can let you know when I am done. Thanks, Kimberly

 

Is the '66 rear seat available? It is a 2dr Skylark w/ the ashtray well/ armrests right?

 

Yes it is a 2 door with the ashtray well armrests. I will check tomorrow to see what kind of shape its in and get back to you tomorrow evening with pics. Thanks, Kimberly

 

Is the '69 a 350 ?? If so, do you have a dipstick tube in it ??

The last piece to complete my engine rebuild...

 

Here are the seats. The back is good and solid with only surface rust and the lower seat has some flaky rust and few are thin. Thanks, Kimberly