POSI Rear ends

Discussion in 'Parts for sale' started by hugger, Sep 20, 2020.

  1. hugger

    hugger Well-Known Member

    not sure on ratio yet
    Olds 12bolt cover Hybrid came out of 70 442 3.42ratio
    Chevy 8.5 2.73
    $750 each

    12bolt chevy 3.31 GM gears GM posi unit,...blasted painted all new bearings etc,..detailed,..no brakes or backing plates,..stock c clip axles ,.can provide some plates $1750

    will meet within 100miles of 29376
     
    Last edited: Sep 26, 2020
  2. Ryans-GSX

    Ryans-GSX Have fun, life is short.

    Interested in the 12 bolt but would like more info. Is it a chevy 12 bolt ?
     
  3. Jim Rodgers

    Jim Rodgers Well-Known Member

    Interested in Buick 8.5 depending on ratio.
     
  4. frednoah

    frednoah Well-Known Member

    Also interested in the Buick 8.5 when you have more info on it.
     
  5. hugger

    hugger Well-Known Member

    information update
     
  6. Jim Rodgers

    Jim Rodgers Well-Known Member

    Where is the update?
     
  7. frednoah

    frednoah Well-Known Member

    Looks like first post was edited with new info
     
  8. hugger

    hugger Well-Known Member

    Correct
     
  9. C.Rob

    C.Rob Well-Known Member

    Interested in gsx wing
     
  10. Jim Rodgers

    Jim Rodgers Well-Known Member

    Dont see the 8.5 ratio?
     
  11. hugger

    hugger Well-Known Member

    I'll check it tomorrow
     
  12. Ryans-GSX

    Ryans-GSX Have fun, life is short.

    Did you change the price of the 12 bolt when you updated the info ?
     
  13. hugger

    hugger Well-Known Member

    Yes,..Not the same rearend
     
  14. frednoah

    frednoah Well-Known Member

    Any update on the 8.5 ratio?

    Also curious as to differences between Chevy and Buick 8.5. Is the only difference the bolt in versus c-clip axles? Any other changes that would keep me from using it in a 69 Skylark with a basically stock 350?
     
  15. hugger

    hugger Well-Known Member

    No sir direct swap,..will need a hybrid u joint and possibly shorten tge driveshaft or get one from a 71to 72 lark
     
  16. hugger

    hugger Well-Known Member

    but yes c clip axles vs the buick bolt in,..certainly nothing to worry about with 350 or anything under 500hp imo
     
  17. hugger

    hugger Well-Known Member

    Update on ratios
     

Share This Page