Rear License Plate Bracket Install

Discussion in 'Wrenchin' Secrets' started by Paul Stewart, Mar 5, 2018.

  1. Paul Stewart

    Paul Stewart Well-Known Member

    This is almost embarrassing, but how do you do it? After installing my newly re-chromed bumper I am now trying to reinstall the license plate bracket, and I am a bit perplexed? There has to be an easy way, so please fill me in!
     
  2. mrolds69

    mrolds69 Still restoring!!!

    Different years use different brackets. I know the stamped pattern is different, maybe the screw spacing is, too. Maybe you have the wrong bracket? What's the problem?
     
  3. flynbuick

    flynbuick Super Moderator Staff Member

    The 70 model bracket has a narrow spacing between the mounting bolts relative to a 71-72.
     
  4. Paul Stewart

    Paul Stewart Well-Known Member

    There is really no access to the bolt heads from behind?
     
  5. buick64203

    buick64203 Buick Hunter Staff Member

    The bolts go in from behind. You have to put a block of wood or something to overcome the spring and keep the door in the open position. Then you can go in through the filler opening.
     
  6. Paul Stewart

    Paul Stewart Well-Known Member

    1F2DEEE5-B626-45B5-8AD0-566E95198DB9.jpeg Thats what I figured, thanks for the help! Done
     
  7. gstewart

    gstewart Well-Known Member

    Worst case u would have to remove the bumper.
     
  8. Paul Stewart

    Paul Stewart Well-Known Member

    Spent an hour installing that yesterday! Jason had the quick fix thank God.......
     

Share This Page