Review for Evapo-Rust

Discussion in 'Wrenchin' Secrets' started by 12lives, Nov 27, 2018.

  1. 12lives

    12lives Engage! - Jean-Luc Picard

    E'nuff said - for you newbies out there this is the stuff you need. Every now and then you run across something that does what it says and makes you smile when you use it. Evapo-Rust is one of those products. My 3 gal can is over 10 years old, used many times, and it works and works until it doesn't. It does not hurt anything - plastic, etc. This was soaked overnight but I could have stopped after 15 minutes (75% of the rust was gone). It's not cheap, but good things usually aren't. The rust is gone - not converted! You do need to rinse it off with water. I towel dry and carefully use a hand held torch to dry it completely.
    https://www.evaporust.com/evapo-rust-rust-remover
    IMG_0555.JPG
    and after I flipped it over and soaked it overnight the right side looked like the left.
     
  2. Mike B in SC

    Mike B in SC Well-Known Member

    Been using EvapoRust for fifteen years, great stuff!
     
  3. SpecialWagon65

    SpecialWagon65 Ted Nagel

    Good stuff, I miss my 55 gallon drum of it.
     
  4. Bigpig455

    Bigpig455 Fastest of the slow....

    Not to take anything away from Evaporust, but white vinegar does the same thing for about 2 bucks a gallon. Takes a little longer, but just as effective....
     
  5. JAMES CARROLL

    JAMES CARROLL MADE IN TEXAS

    Great info guys. I didn't know about either one. Just so happens I have some seat tracks that need the same attention. Problem solved.. Thanks!
     

Share This Page