Guys, Any issues with fit on an A/C 1972 GS with 455 and turbo 400? Anyone have pics of the TA headers in the engine bay, crossmember area? Much appreciated - thanks
TA makes 2 versions, one for cars with A/C and one without. http://www.taperformance.com/proddetail.asp?prod=TA_2014CHB
what size tubes are you using....I have the 2 1/8 tubes, my motor is moved back. passenger right in not issues. drivers side I had the clearance the tube down around lower control arm mount a fair amount. had to cut the flange between 5 and 7 to get enough flex to get gsskets to seal. I also have to remove the steering shaft from the rag joint to get it in
