Toe Pan Outer Cover Assembly--Part numbers? Please see pic.

Discussion in 'Chassis restoration' started by NZ GS 400, Jan 13, 2017.

  1. NZ GS 400

    NZ GS 400 Gold Level Contributor

    Are these parts reproduced? Are they called something different these days? Thanks. Toe Pan Outer Cover.PNG
     
    NZ GS 400, Jan 13, 2017
    #1
  2. Mark Demko

    Mark Demko Well-Known Member

    What is this part of?
    Where the steering column comes thru the firewall?
    4 speed shifter comes up thru the trans tunnel?
    Kinda hard to'cipher from the pic
     
    Mark Demko, Jan 14, 2017
    #2
  3. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    Yeah, I'm not sure what that is either. Ed, it's your picture, what section of the chassis manual did that come from?
     
    LARRY70GS, Jan 14, 2017
    #3
  4. knucklebusted

    knucklebusted Well-Known Member

    Is that the boot for a clutch rod?
     
    knucklebusted, Jan 14, 2017
    #4
  5. CJay

    CJay Supercar owner Staff Member

    CJay, Jan 14, 2017
    #5
  6. NZ GS 400

    NZ GS 400 Gold Level Contributor

    Sorry for the confusion guys. Yes, it is the steering column at the firewall. Here is a pic of the car.

    I know I need the clutch rod boot. I also need the boot the goes around the steering column.

    Jason, yes it looks like I might need that plate too that you linked to from Ebay? From the service manual diagram, it looks to me like I need the bellows assembly and retainer at least.
    This?
    http://www.ebay.com/itm/1964-1967-Chevelle-El-Camino-Malibu-Firewall-Rod-Boot-Retainer-/322383050595?hash=item4b0f86f763:g7cAAOSwmLlX2G22&vxp=mtr

    20170115_090636.jpg
     
    NZ GS 400, Jan 14, 2017
    #6
  7. Schurkey

    Schurkey Silver Level contributor

    I can't figure out why this is in the "Street/strip 400/430/455" part of the web site. None of it looks like engine parts to me.
     
    Schurkey, Jan 14, 2017
    #7

Share This Page