Will be parting out a 1969 GS 350 4 speed- with a few 4 speed parts

Discussion in 'Car Part-Outs' started by gd2227, Aug 1, 2020.

  1. gd2227

    gd2227 Platinum Level Contributor

    I bought a Canadian GS 350 factory 4 speed, consolette car for some parts I need. There is not much left.

    -GS hood with scoops and seal plates- hood skin is good, hood pin holes, hood brace has some small rot issues
    -A bunch of factory 350 4 speed parts- Z bar to clutch pedal rod, Z bar, flywheel, bellhousing, fork, and some other misc parts
    -Floor shift/ 4 speed non tilt column
    -Misc interior parts
    -Misc engine parts
    -there is a 455 block (? number), crank, rods, pistons, heads, timing cover, and other parts in the car.
    -Factory/ dealer installed PS door mirror with date code mirror glass

    Previous owner kept the 12 bolt (ughh), the consolette, shifter, rods, and Muncie trans. I will be getting the GM of Canada documentation because I think it is a factory solid black on black car (!!!).

    If anyone needs misc bolts, trim, etc, please let me know, as this car will be stripped and scrapped as quickly as I can.


    D57= consolette, M20 = Muncie 4 speed, 188= Black bucket
    Brian Albrecht likes this.
  2. 2manybuicks

    2manybuicks Platinum Level Contributor

    Interested in the passenger side mirror. What is the date code?
  3. gd2227

    gd2227 Platinum Level Contributor

    Steve- How are you? I looked at it quick and saw an "8". The mirror was flipped upside down. As soon as I righted it, I knew it was an original one... I will be cutting the door metal around it to send to the buyer to use as a template. Don't expect this to be "nice".. It's pitted. However, it's original and has all of the correct hardware and most of the original plastic gasket...
  4. Chuck Bridges

    Chuck Bridges Well-Known Member

    Any chance the wiper/washer motor is still in the car? I need one for my wildcat and it looks the same as mine. 2 speed wiper.
  5. gd2227

    gd2227 Platinum Level Contributor

    Chuck- it was gone. Just the bracket was there
  6. Chuck Bridges

    Chuck Bridges Well-Known Member

    Thank you anyways. I appreciate your time.
  7. mikethegoon

    mikethegoon Well-Known Member

    Hood hinges any good?
  8. 2manybuicks

    2manybuicks Platinum Level Contributor

    PM sent!
  9. Dano

    Dano Platinum Level Contributor

    PM sent (& replied - Thx!). I should officially jump in line on the 350 4-sp parts (exc. bellhousing & flywheel) pending info per PM. Also floor hump & strg. col. pending info.
  10. Ryans-GSX

    Ryans-GSX Have fun, life is short.

    Interested in the flywheel, bellhousing, & fork.
  11. Dano

    Dano Platinum Level Contributor

    That may work out well exc. for the fork, lol. I can't remember if my car came w/one. It may have. It came w/a Z-Bar too that's not in great shape. I have 3 humps that all need repair so was hoping George has a better one so if you need one (or a Z-Bar) we can trade something. Looked like the storm mostly missed you this morning bit I suspect you got some good wind. Hope all is well.
  12. gd2227

    gd2227 Platinum Level Contributor

    Hump is not usable. The back story was this car was a factory black on black bucket 69 GS 350 4 speed. It got a little "rusty" then sat. The owner removed the $$$ items (consolette, buckets, Muncie, shifter, rods, and the 12 bolt) then just let it sit... and rot. From the door sills back, there is no frame. I lifted the trunk lid and there was just ground. The floors are mostly gone. What remains was all dented with fork lift forks. The entire windshield perimeter is rotted. Both doors are dented in and rotted. Both fenders are junk.
    The good: 69 GS hood with scoops and seals, the 455 block, crank, rods, heads, manifolds, and timing cover sitting in the car.
    -the steering column
    -Some wiring
    -The instrument cluster
    -Some interior pieces
    -4 speed parts- pedals, pedal to Z bar rod, firewall boot plate, Z bar, bracket, ball, adjuster, fork, bellhousing, and flywheel.
    -14" rim and ribbed center cap
    -Small trim
    -Some misc screws, nuts, bolts, etc

    I wish I could save this one but it is wayyyyy too far gone.

    I have Steve for the PS mirror, Dano for the 4 speed parts, Ryan for some of the 4 speed parts (if dano bails).

    I do have this on FB as I want to help as many people as I can before it being cut up and hauled off.
  13. flht25

    flht25 Well-Known Member

    I am interested in 4 speed pedals. What is the price shipped to 77384.
  14. 78Regal350

    78Regal350 Well-Known Member

    I’ll get next in line for the flywheel just in case.
  15. BuickV8Mike

    BuickV8Mike SD Buick Fan

    Interested in the lower steering column cover, interior door panel ss trim, speedo glass and arm rest screws. Pending photos/more info to 91942. Thanks, Mike
  16. Buicksky

    Buicksky Silver Level contributor

    George, Nice find I think you have the market cornered on 4 speed GS cars . LOL
  17. gd2227

    gd2227 Platinum Level Contributor

    Tony- LOL! I bet this car was a looker in the day! Factory black hardtop with black bucket interior, 4 speed with consolette. I think I'm going to send off for the GM of Canada documentation on this car, just to see how it came from the factory. It kills me it has to be cut up... However, she is way too far gone...
    Dano likes this.
  18. gd2227

    gd2227 Platinum Level Contributor

    Mike- I will get her home on Saturday and have a better idea of everything. As I remove, I will be posting pictures here then for all of you that have posted. Then, it'll go to the general ads. There are a few "hard to find" pieces that I am keeping (why I bought the car), everything else is up for grabs.
    Most of your pieces will be easy to box and ship. My only fear will be the glass. It'll be heavy and I don't trust the shipping companies.. However, we can talk more over the next week.
  19. FLGS400

    FLGS400 Well-Known Member

    George, If the glove box lock casing is still there, I would be interested in it. I just posted in the wanted section looking for this.

    It looks like this was an AC car, too. I'm looking for the plastic duct piece that goes under the dash, on the driver's side.

    Thank you!
  20. gd2227

    gd2227 Platinum Level Contributor

    Non-AC car. What does the duct piece look like? I may have a spare..

Share This Page