wtb 67 skylark firewall connector pins

Discussion in 'Parts wanted' started by DR BOOST, Jan 17, 2020.

  1. DR BOOST

    DR BOOST Member

    in an attempt to convert my distributor resistance wire to a normal 12v wire, i mangled the firewall connector pin. does anyone have any spares or know where to buy them?
     
  2. TrunkMonkey

    TrunkMonkey Well-Known Member

    Can you provide an image of the pin or connector?
     
  3. Rocket Racer

    Rocket Racer Well-Known Member

    The resistance wire terminal does not get power in the "start" position, when cranking the engine. The yellow wire from the "R" terminal on the starter sends power to the "+" terminal on the ignition coil, to get the started. Then the resistance wire reduces the voltage to the coil. This is to keep from burning the points up.
     
  4. DR BOOST

    DR BOOST Member

  5. DR BOOST

    DR BOOST Member

  6. DR BOOST

    DR BOOST Member

    That is good to know, i have been using the wiper power wire to power my hei for about a year now...it works quite well!
     

Share This Page