Looking just for a small piece of the squre plastic mesh used in the 67 grill. Need for a repair job. A piece about 4" long and an inch wide would work. If you have something laying around, I'd greatly appreciate it.
I can help I think. Can you post a pic of the broken section of the grille? I'll try to cut the same section out if I can. Tom
As long as it's the square mesh, anywhere you want to cut out a piece will be fine. I have a section maybe 1/2' wide by 3" or 4" long that has a few pieces missing. The damaged area is up high and to the passenger side of the grill. The plan is to just splice in a couple of small pieces with epoxy. I greatly appreciate your help, Tom.
