Welcome to V8Buick.com.
Page 4 of 22 FirstFirst 1234567814 ... LastLast
Results 76 to 100 of 539
  1. #76
    Join Date
    Feb 2002
    Location
    Gilbert AZ
    Posts
    17,698

    Default Re: TA Perf SP-1 & Alum Head for the 350

    If you guys really want to do something constructive about this, email or call Mike at TA and tell him (or Dave) how excited you are that they will be putting out some new 350 perf parts.
    Ex-1968 GS350
    Ex-1998 Riviera

  2. #77
    Join Date
    Mar 2004
    Location
    Edmonton Alberta
    Posts
    15,359

    Default Re: TA Perf SP-1 & Alum Head for the 350

    Quote Originally Posted by 71skylark3504v View Post
    How is this done? Is there a mopar intake that is compatible with a SBB?
    http://www.v8buick.com/showthread.ph...=buick+skyhawk

    Scroll down to the yellow skyhawk. Thats a Buick 350 with heavily ported heads, and all the goodies including a sectioned and rebuild M1 pre Magnum intake. Thats a 2900 pound car I believe......John G build the whole thing...
    __________________________________________________ __________________________________
    My book called Small Block Buick Performance covering the V6, 215, 300, 340, and Buick 350 engines will be released soon.

    http://www.v8buick.com/forumdisplay....rformance-Book
    __________________________________________________ ____________________________
    1970 Buick Skylark Turbo 350 street/strip

  3. #78
    Join Date
    Apr 2006
    Posts
    1,369

    Default Re: TA Perf SP-1 & Alum Head for the 350

    I concur, Mike rules, but it's not about impatience, it's about being an informed consumer. I can get race ported heads with bigger stainless valves and all the good stuff for about $2000, now. If I have some idea of when these heads will be available, and for what price, it could be worth the wait. The wait, however, is yet to be defined, or even BALLPARKED! Just looking for some idea here. Months? Years? Industry leaders like TA should be able to give us something to go on.

    We're all salivating, we all smell what's cookin', but we have no idea when dinner's gonna be ready!

  4. #79
    Join Date
    May 2003
    Location
    I-95, Old exit #69 ;]
    Posts
    5,309

    Default Re: TA Perf SP-1 & Alum Head for the 350

    We're all salivating, we all smell what's cookin', but we have no idea when dinner's gonna be ready!

    we small block guys have been starving since 1961. you'd think we would have learned patience by now.


    no, seriously, i'm sure you'll get better results from this if you concentrate on sending Mike positive vibes instead of coming in here and going "gimme, gimme, gimme". i'm not seeing an email address on their web site but you could always send them a letter to buy a catalog and include a note telling them how much the small block parts announcement excites you. and you can also PM their accounts here on V8, of course.

    TA Performance Products, Inc.
    16167 N. 81st Street
    Scottsdale, AZ 85260
    (480) 922-6807
    (480) 922-6811 (Fax)
    Mike Tomaszewski

    include $5 US for mailing to the 50 states or $5 US + postage for mailing the catalog to non-US addresses

  5. #80
    Join Date
    May 2007
    Posts
    739

    Default Re: TA Perf SP-1 & Alum Head for the 350

    Quote Originally Posted by TA Perf View Post
    This will not happen over night.

    it's been two months, we know that! (KIDDING )


    I sure am excited though, it doesn't look likely that I'll be able to afford the heads for a good while...

    AND here comes the new guy question!

    What changes can I expect (power wise) if I just put an intake on? I'm still new at this, and I know its a dumb question but im still unsure...

    But I dont think this small block Buick crowd has been this excited in a while!!!

    Come on everyone at T/A ... We can't be anymore ready guys!
    Chase Hicks.
    Tennessee...

    "Experience is what you get,when you didn't get what you wanted"- Randy Pausch

  6. #81
    Join Date
    Mar 2004
    Location
    Edmonton Alberta
    Posts
    15,359

    Default Re: TA Perf SP-1 & Alum Head for the 350

    Quote Originally Posted by lespaul13 View Post
    it's been two months, we know that! (KIDDING )


    AND here comes the new guy question!

    What changes can I expect (power wise) if I just put an intake on? I'm still new at this, and I know its a dumb question but im still unsure...

    Read back a few pages in this thread, we covered the same question. But basicaly the single plane intake is better for higher rpm reving with heads and exhaust that can flow big time. Not your typical 2000-5500 rpm street car but the 3500-7000 rpm race cars need the single plane intake.
    __________________________________________________ __________________________________
    My book called Small Block Buick Performance covering the V6, 215, 300, 340, and Buick 350 engines will be released soon.

    http://www.v8buick.com/forumdisplay....rformance-Book
    __________________________________________________ ____________________________
    1970 Buick Skylark Turbo 350 street/strip

  7. #82
    Join Date
    May 2003
    Location
    I-95, Old exit #69 ;]
    Posts
    5,309

    Default Re: TA Perf SP-1 & Alum Head for the 350

    What changes can I expect (power wise) if I just put an intake on?


    currently there are only dual plane aftermarkets available. most tests show very little performance gain from simply swapping in these intakes as the factory irons seem to flow pretty well for what they are.

    biggest thing you'd gain with the intake is taking weight off the front of the car.

    you'd show more gain if you took the intake swap as an opportunity to do some home made port matching. just to make sure there's not any reversion at the intake/gasket/head interface. if that went well you could then attempt some pocket porting on your stock heads. i wouldn't do home-grown port work on the coming aluminums though.

  8. #83
    Join Date
    Feb 2002
    Location
    Gilbert AZ
    Posts
    17,698

    Default Re: TA Perf SP-1 & Alum Head for the 350

    Quote Originally Posted by Justa350 View Post
    I concur, Mike rules, but it's not about impatience, it's about being an informed consumer. I can get race ported heads with bigger stainless valves and all the good stuff for about $2000, now. If I have some idea of when these heads will be available, and for what price, it could be worth the wait. The wait, however, is yet to be defined, or even BALLPARKED! Just looking for some idea here. Months? Years? Industry leaders like TA should be able to give us something to go on.

    We're all salivating, we all smell what's cookin', but we have no idea when dinner's gonna be ready!

    Since TA obviously isn't ready to publicly post a timeline, why don't you give Mike a call and speak to him personally? Don't expect alum 350 heads real soon. Those race ported heads you mention might be the way for you to go if you don't really want to wait to see how the 350 projects come along. The SP intake is hopefully on a much faster track than heads though. Call Mike, he loves to talk Buick on the phone. 480-922-6807. Or email TA. taperf@aol.com
    Ex-1968 GS350
    Ex-1998 Riviera

  9. #84
    Join Date
    May 2003
    Location
    I-95, Old exit #69 ;]
    Posts
    5,309

    Default Re: TA Perf SP-1 & Alum Head for the 350

    If I have some idea of when these heads will be available, and for what price, it could be worth the wait. The wait, however, is yet to be defined, or even BALLPARKED!

    the production order is intended to be;
    1. 455 Tomahawk aluminum block
    2. single plane 350 intake
    3. Street Eliminator 350 head

    as the Tomahawk does not yet have an announced date i would certainly not plan on having the heads in time to put together an engine for next race season. we could easily be out past that.

  10. #85
    Join Date
    May 2006
    Location
    baltimore burbs
    Posts
    453

    Default Re: TA Perf SP-1 & Alum Head for the 350

    Quote Originally Posted by David Gramlow View Post
    If you guys really want to do something constructive about this, email or call Mike at TA and tell him (or Dave) how excited you are that they will be putting out some new 350 perf parts.

    Ringggggg...............Ringgggggggg.............R ingggggggg..........

    Mike from TA : Hello?
    Me: Hi Mike.
    Mike from TA: Hi, How are you?
    Me: I'm fine how are you?
    Mike from TA: I'm pretty good, Howabout you?
    Me: Someone told me to call you and tell you "How excited I am".
    Mike from TA: uhhh?
    Me: Does this excite you that I'm this excited?
    Mike from TA: uhhh?
    Me: Its ok Mike no need to be shy because I'm really really excited.
    Mike from TA: Ok I think we established that already.(while laughing)
    Me: Mike you just don't seem to understand. This excitement is almost unbearable and it makes me wanna scream things in different languages.
    Mike from TA: Well ok then.
    Me: Mike I have your car.
    Mike from TA: what car?
    Me: The car you will never see again unless you make me an SP1 Aluminum intake.
    Mike from TA: *CLICK*
    Me: hello?
    Me: hello?
    Me: Are you there Mike?
    Dial tone remits.

    Don't think that worked to well.

    Ringgggg.................Ringgggggg..........Ringg gggggg.....
    Cmon TA I was only dramatising... LOL
    69' Skylark Custom w/ 1970 350-2 rochester 650cfm doublejet rejetted and recalibrated w/ Hooker Super comp headers B&M Th-350 stage2 valve body
    Adjustable Air shocks in rear & coil overs in front w/ edibach springs 265/60 r14 rear & 215/60 r14 front

  11. #86
    Join Date
    Mar 2004
    Location
    Edmonton Alberta
    Posts
    15,359

    Default Re: TA Perf SP-1 & Alum Head for the 350

    Quote Originally Posted by 69cloner View Post
    Ringggggg...............Ringgggggggg.............R ingggggggg..........

    Mike from TA : Hello?
    Me: Hi Mike.
    Mike from TA: Hi, How are you?
    Me: I'm fine how are you?
    Mike from TA: I'm pretty good, Howabout you?
    Me: Someone told me to call you and tell you "How excited I am".
    Mike from TA: uhhh?
    Me: Does this excite you that I'm this excited?
    Mike from TA: uhhh?
    Me: Its ok Mike no need to be shy because I'm really really excited.
    Mike from TA: Ok I think we established that already.(while laughing)
    Me: Mike you just don't seem to understand. This excitement is almost unbearable and it makes me wanna scream things in different languages.
    Mike from TA: Well ok then.
    Me: Mike I have your car.
    Mike from TA: what car?
    Me: The car you will never see again unless you make me an SP1 Aluminum intake.
    Mike from TA: *CLICK*
    Me: hello?
    Me: hello?
    Me: Are you there Mike?
    Dial tone remits.

    Don't think that worked to well.

    Ringgggg.................Ringgggggg..........Ringg gggggg.....
    Cmon TA I was only dramatising... LOL
    I sure hope ya made that up because if not, we are less likely to get a intake at all with "support" like that. I called, gave them my info and told them to call me when its ready. If 100 people called and said the same we'd get it quicker than if people complain and grind ta.

    I don't meen to be controversial but c mon everyone!
    __________________________________________________ __________________________________
    My book called Small Block Buick Performance covering the V6, 215, 300, 340, and Buick 350 engines will be released soon.

    http://www.v8buick.com/forumdisplay....rformance-Book
    __________________________________________________ ____________________________
    1970 Buick Skylark Turbo 350 street/strip

  12. #87
    Join Date
    May 2003
    Location
    I-95, Old exit #69 ;]
    Posts
    5,309

    Default Re: TA Perf SP-1 & Alum Head for the 350

    Ringggggg...............Ringgggggggg.............R ingggggggg..........

    Mike from TA : Hello?
    Me: Hi Mike.
    Mike from TA: Hi, How are you?
    Me: I'm fine how are you?
    Mike from TA: I'm pretty good, Howabout you?
    Me: Someone told me to call you and tell you "How excited I am".
    Mike from TA: uhhh?
    Me: Does this excite you that I'm this excited?
    Mike from TA: uhhh?
    Me: Its ok Mike no need to be shy because I'm really really excited.
    Mike from TA: Ok I think we established that already.(while laughing)
    Me: Mike you just don't seem to understand. This excitement is almost unbearable and it makes me wanna scream things in different languages.
    Mike from TA: Well ok then.
    Me: Mike I have your car.
    Mike from TA: what car?
    Me: The car you will never see again unless you make me an SP1 Aluminum intake.
    Mike from TA: *CLICK*
    Me: hello?
    Me: hello?
    Me: Are you there Mike?
    Dial tone remits.

    Don't think that worked to well.


    comedy gold! you aren't related to Ned are you?

  13. #88
    Join Date
    May 2006
    Location
    baltimore burbs
    Posts
    453

    Default Re: TA Perf SP-1 & Alum Head for the 350

    Yeah I was only kidding guys..
    Mike is kinda like the 13th appostle of the Buick Congregation.
    Behold ..............
    A pale GS!! And the rider's name was Mike..

    I'd never harass Mike like that.. That is unless we were dressed up like Lost sheep and he wanted to be Bo-peep but that's not the case here is it?


    BTW I will trade forty sheep for an aluminum sp1 intake.
    69' Skylark Custom w/ 1970 350-2 rochester 650cfm doublejet rejetted and recalibrated w/ Hooker Super comp headers B&M Th-350 stage2 valve body
    Adjustable Air shocks in rear & coil overs in front w/ edibach springs 265/60 r14 rear & 215/60 r14 front

  14. #89
    Join Date
    Mar 2006
    Location
    Maryland
    Posts
    12

    Default Re: TA Perf SP-1 & Alum Head for the 350

    Go Buick,
    Just wanted to chime in and voice my support of more upgrade parts(aluminum heads specifically) for the Buick 350. More interest=better chance of more parts. I am looking forward to building a killer 350 SBB combo to show many of the SBC naysayers(friends of mine) what can be done and still be different. Keep up the good work TA and thanks for all you do for us.
    Thank you,
    Joe D

  15. #90
    Join Date
    Feb 2002
    Location
    Scottsdale AZ
    Posts
    514

    Default Re: TA Perf SP-1 & Alum Head for the 350

    You guys are FUNNY. I have no solid time line at this point. We are still trying to finish up on the 455 aluminum block & heads. I'm going to try and get the 350 intake started during the completion of the new big block parts. I think the intake should be done first, but Sherri thinks I should do the heads first. She tells me that she has never had a request for a single plane intake. Any ideas how we can fix that? Anyway, the intake should take less time to get finished and be a less expensive part to purchase.
    Mike Tomaszewski
    TA Performance Products Inc.
    www.taperformance.com
    480-922-6807

  16. #91
    Join Date
    Feb 2002
    Location
    Cedar Rapids, IA
    Posts
    1,699

    Default Re: TA Perf SP-1 & Alum Head for the 350

    Quote Originally Posted by TA Perf View Post
    You guys are FUNNY. I have no solid time line at this point. We are still trying to finish up on the 455 aluminum block & heads. I'm going to try and get the 350 intake started during the completion of the new big block parts. I think the intake should be done first, but Sherri thinks I should do the heads first. She tells me that she has never had a request for a single plane intake. Any ideas how we can fix that? Anyway, the intake should take less time to get finished and be a less expensive part to purchase.
    I may stick with the DP intake, and just go with the heads....... I am holding out on putting another set of heads on the green car right now. I am hoping the next set to go on there are NOT made of iron!!
    I am hoping to get something streetable in the 425-450hp range, so I'll swap cams again at that point............ I'll be calling you when the time comes!

  17. #92
    Join Date
    May 2003
    Location
    I-95, Old exit #69 ;]
    Posts
    5,309

    Default Re: TA Perf SP-1 & Alum Head for the 350

    I think the intake should be done first, but Sherri thinks I should do the heads first. She tells me that she has never had a request for a single plane intake.

    yeah, she's never been on the bbs's has she? there's an entire multi-page thread floating around here somewhere that's about nothing but a 350 single plane.

    but whatever floats your boat Mike. you can see the way these guys are slavering. they'll take anything they can get as fast as you can give it to 'em.

  18. #93
    Join Date
    Mar 2004
    Location
    Edmonton Alberta
    Posts
    15,359

    Default Re: TA Perf SP-1 & Alum Head for the 350

    Quote Originally Posted by TA Perf View Post
    You guys are FUNNY. I have no solid time line at this point. We are still trying to finish up on the 455 aluminum block & heads. I'm going to try and get the 350 intake started during the completion of the new big block parts. I think the intake should be done first, but Sherri thinks I should do the heads first. She tells me that she has never had a request for a single plane intake. Any ideas how we can fix that? Anyway, the intake should take less time to get finished and be a less expensive part to purchase.

    Any ideas on how we can fix that? Yeah, come on everyone who wants an intake call ta and tell them you want to be contacted when they are ready like I did!!!!!!

    Sheri has a point, there will be lots of people who wil want the alum heads and stage 1 dual plane intake instead of the single plane to make a street/strip motor. However, there are MANY people using the SP intake on the 455 on the street, since the buick motors make so much low rpm torque anyway unlike other brands the SP intakes work okay on the street. Just my opinion....

    There is a huge thread over at BPG regarding building a single plane intake out of a mopar intake so speak up you guys/gals and we can get the parts we NEED.

    We need BOTH the heads and intake. I will commit to 2 SP intakes and one set of alum heads. I've left my info with you guys at ta just waiting for a call saying they are ready, but I understand the progression and order your working on these parts at.

    Thans again TA, Sean Gaskin
    __________________________________________________ __________________________________
    My book called Small Block Buick Performance covering the V6, 215, 300, 340, and Buick 350 engines will be released soon.

    http://www.v8buick.com/forumdisplay....rformance-Book
    __________________________________________________ ____________________________
    1970 Buick Skylark Turbo 350 street/strip

  19. #94
    Join Date
    May 2006
    Location
    DeKalb, Illinois
    Posts
    1,371

    Default Re: TA Perf SP-1 & Alum Head for the 350

    TA, THANKS for the parts development. I am definately interested in heads as it would be an easier swap for me as I don't want to try porting my heads. I will leave my iron heads on until the aluminum are ready. I'll start stashin cash from the mrs in my toolbox (where she never goes), (or the kitchen) so I have the $$$$ when they are ready. Already have a DP intake. Thanks again and I will be patient as my car is at least a year from hittin the street.

  20. #95
    Join Date
    May 2006
    Location
    Atlanta
    Posts
    262

    Default Re: TA Perf SP-1 & Alum Head for the 350

    Quote Originally Posted by bob k. mando View Post
    [I].....you can see the way these guys are slavering.
    I like that. Yep, we are slavering.
    Tom Willisford

  21. #96
    Join Date
    Mar 2004
    Location
    Edmonton Alberta
    Posts
    15,359

    Default Re: TA Perf SP-1 & Alum Head for the 350

    Good points Fox's Den (Guy isn't it?)

    My opinion on this whole situation:

    Ta hinted that they need some capital or at least commitment of interest to reduce the risk of producing the intake and heads.

    Ta would follow through with quality bottom end parts once the heads and intakes have paid for the R+D and tooling costs that they are spending to step up and make the 350 a REAL player. If the heads and intake don't sell very well then TA will not make the crank and rods for us in my opinion.

    Which would leave us DIE HARD BUICK 350 fans to get custom parts made at high dollar to complete the most potent factory block smallblock around. Once we get these motors built and start making many brand bigblocks look silly then the ta heads and intake will sell like crazy as everyone jumps on the bandwagon. Unlike the 455 the 350 will rev HIGH with the right parts.

    Childs and Albert, and Mondello have made at least one set of rods each for the 350 as well as the recent company who made a batch and posted on here. Eagle has already made a crank for Bill M and could make more if we wanted. The key would be for a bunch of us to get together and convince these companies to make a batch for us at an affordable price.

    I for one would be interesting in making a personal investment in the effort with money to get things going. I believe in these motors! Did ya notice?
    __________________________________________________ __________________________________
    My book called Small Block Buick Performance covering the V6, 215, 300, 340, and Buick 350 engines will be released soon.

    http://www.v8buick.com/forumdisplay....rformance-Book
    __________________________________________________ ____________________________
    1970 Buick Skylark Turbo 350 street/strip

  22. #97
    Join Date
    Mar 2004
    Location
    Out Your Front Window in Akron Ohio
    Posts
    1,632

    Default Re: TA Perf SP-1 & Alum Head for the 350

    I believed in this motor ever since I seen Sonny Seal do it with his 350. This was a long time ago, (about 1990), his car always ran fast and with a little 350 at that. The last time I seen his car run was when he had that accident at Norwalk. I looked under the hood of his car and he had Two, that's right 2 four barrel carbs on his car and what looked like a Hogan Intake possibly? I think he was running in the 11's and he had no power adder and he had a full size Buick. These motors have a lot of potential just waiting to get released. C'mon TA hurry it up this is killing me. I am ready for the intake right now. I am in. Who else is in.
    Bu Hogs Rock by Guy

    355 Buick
    13.50@99 mph motor
    13.31@100 best
    11.81@114 mph 125 shot nitrous
    12.42 @105 mph 75 shot
    200-4r trans 3000 stall 373 gears
    H-O Racing suspension
    Mid 12 sec Nitrous run 80 hp shot https://youtu.be/49JqjgpygUQ

    With 350 trans 11.87@112, 125 shot nitrous 3500 stall
    With 200-4r trans 11.81 @ 114 Same shot 3000 stall w/lockup
    417hp 463tq rwhp w/125 nitrous shot. On motor 284 hp 310 tq. rwp

  23. #98
    Join Date
    Oct 2002
    Location
    The Buick City flint,mi.48506
    Posts
    284

    Talking Re: TA Perf SP-1 & Alum Head for the 350

    I AM INI think the intake should be based on th SPX/Wildcat design and the heads should flow out of the box better than anything possible with ported iron ones. with room to go bigger. My plans for the OPEL are a C/M round tube chassis and a nastayy SSB I am in for heads and a real intake
    Sean Etson
    the BuickCityPsycho
    A.K.A. buick3001964
    64 special worlds fastest 300" buick 12.52@104
    ^^^^^ car gone ,still have the powertrain
    66 Opel Kadett Wagon ( new project )
    JUST WAIT and see
    BPG#1261

  24. #99
    Join Date
    Mar 2004
    Location
    Out Your Front Window in Akron Ohio
    Posts
    1,632

    Default Re: TA Perf SP-1 & Alum Head for the 350

    Quote Originally Posted by Fox's Den View Post
    I believed in this motor ever since I seen Sonny Seal do it with his 350. This was a long time ago, (about 1990), his car always ran fast and with a little 350 at that. The last time I seen his car run was when he had that accident at Norwalk. I looked under the hood of his car and he had Two, that's right 2 four barrel carbs on his car and what looked like a Hogan Intake possibly? I think he was running in the 11's and he had no power adder and he had a full size Buick. These motors have a lot of potential just waiting to get released. C'mon TA hurry it up this is killing me. I am ready for the intake right now. I am in. Who else is in.
    Anybody else going to step up to the plate? What you mean that I am going to have the fastest 350 on the block in a heavyweight car? Lets tell TA that we want a Intake. Are you IN?

    I will try to pull a 10.99 when I get the intake. I only need to go .81 sec to do it. I wonder how much nitrous I will need on top of that 125 shot to do it?
    Bu Hogs Rock by Guy

    355 Buick
    13.50@99 mph motor
    13.31@100 best
    11.81@114 mph 125 shot nitrous
    12.42 @105 mph 75 shot
    200-4r trans 3000 stall 373 gears
    H-O Racing suspension
    Mid 12 sec Nitrous run 80 hp shot https://youtu.be/49JqjgpygUQ

    With 350 trans 11.87@112, 125 shot nitrous 3500 stall
    With 200-4r trans 11.81 @ 114 Same shot 3000 stall w/lockup
    417hp 463tq rwhp w/125 nitrous shot. On motor 284 hp 310 tq. rwp

  25. #100
    Join Date
    Mar 2004
    Location
    Edmonton Alberta
    Posts
    15,359

    Default Re: TA Perf SP-1 & Alum Head for the 350

    Quote Originally Posted by Fox's Den View Post
    Anybody else going to step up to the plate? What you mean that I am going to have the fastest 350 on the block in a heavyweight car? Lets tell TA that we want a Intake. Are you IN?

    I will try to pull a 10.99 when I get the intake. I only need to go .81 sec to do it. I wonder how much nitrous I will need on top of that 125 shot to do it?
    I think you need a custom cam or at least a different one. I'm convinced its your cam thats holding you back.
    __________________________________________________ __________________________________
    My book called Small Block Buick Performance covering the V6, 215, 300, 340, and Buick 350 engines will be released soon.

    http://www.v8buick.com/forumdisplay....rformance-Book
    __________________________________________________ ____________________________
    1970 Buick Skylark Turbo 350 street/strip

 

 
Page 4 of 22 FirstFirst 1234567814 ... LastLast

Similar Threads

  1. Unidentifiable hole in TA Perf. Stg. 1 Intake
    By jim.com5 in forum The Bench
    Replies: 13
    Last Post: 03-11-2007, 06:27 PM
  2. TA Perf stage 1 SE head volume
    By tlivingd in forum Street/strip 400/430/455
    Replies: 4
    Last Post: 04-10-2006, 05:11 PM
  3. Buick 350 head interchangeability - Please comment
    By Dan Gerber in forum Small Block Tech
    Replies: 2
    Last Post: 03-29-2006, 07:34 PM
  4. Question for TA performance on Al-STG1 head
    By brett_s in forum The Bench
    Replies: 19
    Last Post: 11-22-2002, 08:57 AM
  5. TA stage 1 aluminum vs Stage 2 head
    By brett_s in forum The Bench
    Replies: 10
    Last Post: 10-25-2002, 01:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to top