Welcome to V8Buick.com.
Page 1 of 2 12 LastLast
Results 1 to 25 of 45
  1. #1
    Join Date
    Oct 2004
    Location
    PGH,PA, USA
    Posts
    4,930

    Default 350 performance parts and services

    Just a reminder..
    http://www.v8buick.com/showthread.ph...27#post1137727


    Well, the 350 is finally getting in the spotlight of performance. I know some threads are already stickied, but I'd like to put them all in one if I can..

    Twin-turbo kit
    http://www.v8buick.com/showthread.php?t=136800

    Supercharger kit
    http://xsperformance.net

    Forged pistons (NHRA pending)
    http://www.v8buick.com/showthread.php?t=127992

    wiseco forged pistons http://www.wiseco.com/

    also check out forged 231 pistons as it's the cheapest!!

    Mike phillips also has forged pistons
    http://www.v8buick.com/showthread.ph...=Mike+phillips

    Forged connecting rods (NHRA legal)
    http://www.v8buick.com/showthread.php?t=127758

    Aluminum Heads/sp intake (R&D)
    http://www.v8buick.com/showthread.php?t=130745

    The X-factor s/p sheetmetal intake
    http://www.v8buick.com/showthread.php?t=140590

    Chevy Roller Rocker Mod
    http://www.v8buick.com/showthread.ph...64#post1133364

    Custom MLS Headgaskets
    http://www.v8buick.com/showthread.php?t=145786

    Mini Starters and H.O alternators
    65specialconver
    http://www.v8buick.com/member.php?u=226

    HEI specialist
    DavesHEI
    http://www.davessmallbodyheis.com/

    Q-jet specialist
    John Osborne
    270-737-4467 JOP455@AOL.COM

    Fuel injection kit in the works
    rdj59
    http://www.v8buick.com/member.php?u=4318

    36-1 trigger wheel
    BbyCbra
    http://www.v8buick.com/showthread.php?t=132890

    Engine building and Port work
    http://www.gesslerheadporting.com/
    http://www.TAperformance.com
    http://www.trishieldperf.com/
    http://www.paeenterprises.com
    http://www.automachperf.com/index.html

    Performance Rebuild Kit
    http://www.flatlanderracing.com/

    Performance Parts
    http://www.TAperformance.com
    http://www.postonbuick.com

    Monzaz
    http://www.jdrace.com/

    SOME GOOD READINGS!
    http://www.v8buick.com/showthread.php?t=135594
    Last edited by Nothingface5384; 02-01-2008 at 02:26 PM.
    Mike aka BiZnO
    72 twinturbo Skylark

    Buick 350 Inspirational members to me..
    TuBBeD for his 551+ N/A build
    BillMah52 First to take a 350 where no man has gone before
    Justa350 First to hang a pair of turbos and cause Kaos
    GSJohnny First to max out the bore at .090 and his .075 and have engines that actually breath well N/A!
    Bobb Makley First well known to Stroke a 350
    Ken Betts, Hopefully the guy to pull-off 350 AL heads :-D

  2. #2
    TXGS's Avatar
    TXGS is offline The United State of Texas
    Join Date
    Feb 2002
    Location
    HUTTO, TX
    Posts
    4,224

    Default Re: 350 performance parts and services

    Forgot

    Jim Burek and PAE for Porting and Engine building.
    www.paeenterprises.com

    Edit: Also seen under your vendors list.
    Last edited by TXGS; 09-05-2007 at 02:41 PM.
    Phil Green
    72 GS350 449hp 447tq , 390 gears, and 200 4r
    1981 RX7 with 5.3L LS (Project)

  3. #3
    Join Date
    Nov 2006
    Location
    Royal Oak, MI
    Posts
    445

    Default Re: 350 performance parts and services

    Good call. That's where I'm sending my heads to be done very soon!

  4. #4
    Join Date
    May 2003
    Location
    I-95, Old exit #69 ;]
    Posts
    5,309

    Default Re: 350 performance parts and services

    excellent idea.

  5. #5
    Join Date
    Feb 2002
    Location
    Selinsgrove, PA.
    Posts
    1,668

    Default Re: 350 performance parts and services

    Wiseco has forged pistons for the 350. They are both in standard, and race weight. I have the prototype set in my 350.
    Rob Margel

  6. #6
    Join Date
    Mar 2004
    Location
    Edmonton Alberta
    Posts
    15,351

    Default Re: 350 performance parts and services

    Whats the name of Mike Philips Shop? They are good too.
    __________________________________________________ __________________________________
    My book called Small Block Buick Performance covering the V6, 215, 300, 340, and Buick 350 engines will be released soon.

    http://www.v8buick.com/forumdisplay....rformance-Book
    __________________________________________________ ____________________________
    1970 Buick Skylark Turbo 350 street/strip

  7. #7
    Join Date
    Oct 2004
    Location
    PGH,PA, USA
    Posts
    4,930

    Default Re: 350 performance parts and services

    i dont kow but i believe he also made a run for forged pistons..
    Mike aka BiZnO
    72 twinturbo Skylark

    Buick 350 Inspirational members to me..
    TuBBeD for his 551+ N/A build
    BillMah52 First to take a 350 where no man has gone before
    Justa350 First to hang a pair of turbos and cause Kaos
    GSJohnny First to max out the bore at .090 and his .075 and have engines that actually breath well N/A!
    Bobb Makley First well known to Stroke a 350
    Ken Betts, Hopefully the guy to pull-off 350 AL heads :-D

  8. #8
    Join Date
    Dec 2002
    Location
    Montreal, Quebec
    Posts
    1,606

    Default Re: 350 performance parts and services

    Quote Originally Posted by sean Buick 76 View Post
    Whats the name of Mike Philips Shop? They are good too.
    AM&P?
    Glen Robins
    BPG #1857
    '80 LeSabre: '70 350-4, 8.5" with 3.42s
    - built and formerly owned by Floydsbuick
    "All your pretty chrome and paint means nothing if you're watching a pair of shrinking taillights from a primered big-block Vega." -- Jake Amatisto

  9. #9
    Join Date
    Mar 2004
    Location
    Edmonton Alberta
    Posts
    15,351

    Default Re: 350 performance parts and services

    Yeah thats right, add that one on the list!
    __________________________________________________ __________________________________
    My book called Small Block Buick Performance covering the V6, 215, 300, 340, and Buick 350 engines will be released soon.

    http://www.v8buick.com/forumdisplay....rformance-Book
    __________________________________________________ ____________________________
    1970 Buick Skylark Turbo 350 street/strip

  10. #10
    Join Date
    Oct 2004
    Location
    PGH,PA, USA
    Posts
    4,930

    Default Re: 350 performance parts and services

    updated
    Mike aka BiZnO
    72 twinturbo Skylark

    Buick 350 Inspirational members to me..
    TuBBeD for his 551+ N/A build
    BillMah52 First to take a 350 where no man has gone before
    Justa350 First to hang a pair of turbos and cause Kaos
    GSJohnny First to max out the bore at .090 and his .075 and have engines that actually breath well N/A!
    Bobb Makley First well known to Stroke a 350
    Ken Betts, Hopefully the guy to pull-off 350 AL heads :-D

  11. #11
    Join Date
    Mar 2004
    Location
    Edmonton Alberta
    Posts
    15,351

    Default Re: 350 performance parts and services

    Now we just need to get this thread made into a sticky!
    __________________________________________________ __________________________________
    My book called Small Block Buick Performance covering the V6, 215, 300, 340, and Buick 350 engines will be released soon.

    http://www.v8buick.com/forumdisplay....rformance-Book
    __________________________________________________ ____________________________
    1970 Buick Skylark Turbo 350 street/strip

  12. #12
    Join Date
    Oct 2004
    Location
    PGH,PA, USA
    Posts
    4,930

    Default Re: 350 performance parts and services

    yea we do! if not there's the old bump-A-roo
    Mike aka BiZnO
    72 twinturbo Skylark

    Buick 350 Inspirational members to me..
    TuBBeD for his 551+ N/A build
    BillMah52 First to take a 350 where no man has gone before
    Justa350 First to hang a pair of turbos and cause Kaos
    GSJohnny First to max out the bore at .090 and his .075 and have engines that actually breath well N/A!
    Bobb Makley First well known to Stroke a 350
    Ken Betts, Hopefully the guy to pull-off 350 AL heads :-D

  13. #13
    Join Date
    May 2007
    Posts
    739

    Default Re: 350 performance parts and services

    ""
    Street Strip Porting - This is your best bang for the buck. Includes bowl work, gasket match, reshaping of guides, un-shrouding valves and clean-up combustion chambers. These heads can flow in the 260 cfm range. $600.

    ""

    Thats from the PAE site.

    I'm not sure what the flow rate for buick heads are, but how much hp will that make over stock? anyone know ?
    Chase Hicks.
    Tennessee...

    "Experience is what you get,when you didn't get what you wanted"- Randy Pausch

  14. #14
    Join Date
    Mar 2004
    Location
    Edmonton Alberta
    Posts
    15,351

    Default Re: 350 performance parts and services

    Stock intake flows under 200 so 260 could easily support 420hp with the right cam and comp ratio. Above 400 hp you need lots of porting and a large cam as well as lots of compresion. Or you just run low comp, mild cam and some boost!

    There are stock flow #'s in this thread:

    http://www.v8buick.com/showthread.ph...ighlight=heads
    __________________________________________________ __________________________________
    My book called Small Block Buick Performance covering the V6, 215, 300, 340, and Buick 350 engines will be released soon.

    http://www.v8buick.com/forumdisplay....rformance-Book
    __________________________________________________ ____________________________
    1970 Buick Skylark Turbo 350 street/strip

  15. #15
    Join Date
    Aug 2007
    Location
    ellington, ct
    Posts
    1,057

    Default Re: 350 performance parts and services

    Quote Originally Posted by lespaul13 View Post
    ""
    Street Strip Porting - This is your best bang for the buck. Includes bowl work, gasket match, reshaping of guides, un-shrouding valves and clean-up combustion chambers. These heads can flow in the 260 cfm range. $600.

    ""

    Thats from the PAE site.

    I'm not sure what the flow rate for buick heads are, but how much hp will that make over stock? anyone know ?

    A LOT

  16. #16
    Join Date
    Mar 2004
    Location
    Edmonton Alberta
    Posts
    15,351

    Default Re: 350 performance parts and services

    Quote Originally Posted by gsjohnny1 View Post
    A LOT
    especialy if you have a single plane intake eh jonny?
    __________________________________________________ __________________________________
    My book called Small Block Buick Performance covering the V6, 215, 300, 340, and Buick 350 engines will be released soon.

    http://www.v8buick.com/forumdisplay....rformance-Book
    __________________________________________________ ____________________________
    1970 Buick Skylark Turbo 350 street/strip

  17. #17
    Join Date
    Oct 2004
    Location
    PGH,PA, USA
    Posts
    4,930

    Default Re: 350 performance parts and services

    bump!
    as I added a few entries
    Mike aka BiZnO
    72 twinturbo Skylark

    Buick 350 Inspirational members to me..
    TuBBeD for his 551+ N/A build
    BillMah52 First to take a 350 where no man has gone before
    Justa350 First to hang a pair of turbos and cause Kaos
    GSJohnny First to max out the bore at .090 and his .075 and have engines that actually breath well N/A!
    Bobb Makley First well known to Stroke a 350
    Ken Betts, Hopefully the guy to pull-off 350 AL heads :-D

  18. #18
    Join Date
    Oct 2004
    Location
    PGH,PA, USA
    Posts
    4,930

    Default Re: 350 performance parts and services

    slight update, i beleive i got all the current 350 offerings
    if not post em up!
    Mike aka BiZnO
    72 twinturbo Skylark

    Buick 350 Inspirational members to me..
    TuBBeD for his 551+ N/A build
    BillMah52 First to take a 350 where no man has gone before
    Justa350 First to hang a pair of turbos and cause Kaos
    GSJohnny First to max out the bore at .090 and his .075 and have engines that actually breath well N/A!
    Bobb Makley First well known to Stroke a 350
    Ken Betts, Hopefully the guy to pull-off 350 AL heads :-D

  19. #19

    Default Re: 350 performance parts and services

    can you add the link mike phillips had on the board of the 350 build
    he just had at am&p it was about 365 hp with those pistons he carries
    Andy bridgeview,il
    65 special v6 daily driver-this needs to go faster possibly a 380 stroker.
    82 gn clone 455 12.50's on pump, soon trishield 464
    84 gn
    72 skylark convert#2 ,N-25

  20. #20
    Join Date
    Sep 2004
    Location
    Clarkston, MI
    Posts
    1,508

    Default Re: 350 performance parts and services

    I have over 10 years experience with the 350 Buick and can duplicate my Pure Stock combo for a reasonable cost if anyone is looking for a drop in crate engine. 13.92 in a 4000lb with driver car isn’t too bad if I do say so myself.
    Steve Caruso
    Maker of reproduction N-25 exhaust hangers, chrome rally wheels, 68-72 Firewall grommet, MBM brake parts dealer.

    72 GSX clone. Pure Stock 350 13.45@ 100mph
    72 Stage 1 SunCoupe In process
    70 GS race car In process
    50 Studebaker truck
    96 Roadmaster Collectors Edition wagon
    77 Chrysler Cordoba

    Former rides,
    71 Riviera GS
    82 Regal woodie wagon

  21. #21

    Default Re: 350 performance parts and services

    www.automachperf.com/350
    recent Am&p build
    Andy bridgeview,il
    65 special v6 daily driver-this needs to go faster possibly a 380 stroker.
    82 gn clone 455 12.50's on pump, soon trishield 464
    84 gn
    72 skylark convert#2 ,N-25

  22. #22

    Default Re: 350 performance parts and services

    NEW Lunati Voodoo cams
    Number Name
    67000
    Duration @ .050 IN/EX: 207/213; Lift IN/EX: .451"/.470"; LSA / ICL: 112/108; RPM Range: 1000–5200
    Hydraulic; The best torque cam for 350 applications. Expect strong low to mid range horsepower and torque gains. Excellent for RV type vehicles, pleasure boats or towing applications. Good idle!
    67000LK
    Duration @ .050 IN/EX: 207/213; Lift IN/EX: .451"/.470"; LSA / ICL: 112/108; RPM Range: 1000–5200 (w/ lifters)
    Hydraulic; The best torque cam for 350 applications. Expect strong low to mid range horsepower and torque gains. Excellent for RV type vehicles, pleasure boats or towing applications. Good idle!
    67001
    Duration @ .050 IN/EX: 213/219; Lift IN/EX: .470"/.484"; LSA / ICL: 112/108; RPM Range: 1300–5500
    Hydraulic; The best choice for 350 c.i. daily driven street performance vehicle. Good torque and horsepower production with heavier emphasis on the low to mid range. Will work with A/C, power brakes and stock converter. Fair idle!
    67001LK
    Duration @ .050 IN/EX: 213/219; Lift IN/EX: .470"/.484"; LSA / ICL: 112/108; RPM Range: 1300–5500 (w/ lifters)
    Hydraulic; The best choice for 350 c.i. daily driven street performance vehicle. Good torque and horsepower production with heavier emphasis on the low to mid range. Will work with A/C, power brakes and stock converter. Fair idle!
    67002
    Duration @ .050 IN/EX: 219/227; Lift IN/EX: .484"/.505"; LSA / ICL: 112/108; RPM Range: 1600–5800
    Hydraulic; High performance street/strip cam for 350 c.i. Excellent camshaft for cruise night vehicle. Will need 9:1–9:5 compression ratio. Needs 2200 stall speed converter with 3.23–3.42 rear gears. Cam has a very choppy idle!
    67002LK
    Duration @ .050 IN/EX: 219/227; Lift IN/EX: .484"/.505"; LSA / ICL: 112/108; RPM Range: 1600–5800 (w/ lifters)
    Hydraulic; High performance street/strip cam for 350 c.i. Excellent camshaft for cruise night vehicle. Will need 9:1–9:5 compression ratio. Needs 2200 stall speed converter with 3.23–3.42 rear gears. Cam has a very choppy idle!
    67003
    Duration @ .050 IN/EX: 227/233; Lift IN/EX: .505"/.521"; LSA / ICL: 110/106; RPM Range: 2000–6000
    Hydraulic; "Hot street" or bracket cam for 350 engines. Will need 9.5–10.1 compression, 2500–2800 stall speed converter and 3.42–3.73 gears with good induction and exhaust. Likes up to 200 HP nitrous. Cam has a very rough idle quality!
    67003LK
    Duration @ .050 IN/EX: 227/233; Lift IN/EX: .505"/.521"; LSA / ICL: 110/106; RPM Range: 2000–6000 (w/ lifters)
    Hydraulic; "Hot street" or bracket cam for 350 engines. Will need 9.5–10.1 compression, 2500–2800 stall speed converter and 3.42–3.73 gears with good induction and exhaust. Likes up to 200 HP nitrous. Cam has a very rough idle quality!
    http://www.holley.com/types/Buick%20...0Hydraulic.asp
    Andy bridgeview,il
    65 special v6 daily driver-this needs to go faster possibly a 380 stroker.
    82 gn clone 455 12.50's on pump, soon trishield 464
    84 gn
    72 skylark convert#2 ,N-25

  23. #23
    Join Date
    Oct 2004
    Location
    PGH,PA, USA
    Posts
    4,930

    Default Re: 350 performance parts and services

    updated again, added 36-1 trigger wheel, MLS head gaskets, and marks service to fit chevy roller rockers!
    Mike aka BiZnO
    72 twinturbo Skylark

    Buick 350 Inspirational members to me..
    TuBBeD for his 551+ N/A build
    BillMah52 First to take a 350 where no man has gone before
    Justa350 First to hang a pair of turbos and cause Kaos
    GSJohnny First to max out the bore at .090 and his .075 and have engines that actually breath well N/A!
    Bobb Makley First well known to Stroke a 350
    Ken Betts, Hopefully the guy to pull-off 350 AL heads :-D

  24. #24
    Join Date
    Oct 2004
    Location
    PGH,PA, USA
    Posts
    4,930

    Default Re: 350 performance parts and services

    updated again
    Mike aka BiZnO
    72 twinturbo Skylark

    Buick 350 Inspirational members to me..
    TuBBeD for his 551+ N/A build
    BillMah52 First to take a 350 where no man has gone before
    Justa350 First to hang a pair of turbos and cause Kaos
    GSJohnny First to max out the bore at .090 and his .075 and have engines that actually breath well N/A!
    Bobb Makley First well known to Stroke a 350
    Ken Betts, Hopefully the guy to pull-off 350 AL heads :-D

  25. #25
    Join Date
    Mar 2008
    Location
    Santa Cruz CA
    Posts
    104

    Default Re: 350 performance parts and services

    Can you tell me any info about the wiseco pistons, maybe some part # thanks for all the help guy's!

 

 
Page 1 of 2 12 LastLast

Similar Threads

  1. Computer Services offered
    By 71 custom lark in forum The Bench
    Replies: 21
    Last Post: 04-11-2008, 12:58 PM
  2. 68 Skylark Parts car $400
    By 1970 GS 4spd in forum Cars and Parts For Sale Leads
    Replies: 0
    Last Post: 10-22-2006, 07:21 AM
  3. someone's toys & dreams (a must see!!!)
    By slowride66 in forum The Bench
    Replies: 28
    Last Post: 07-15-2006, 09:34 PM
  4. If you have any parts for 70-72...
    By NJBuickRacer in forum "Pay It Forward"
    Replies: 20
    Last Post: 12-20-2004, 03:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to top