Welcome to V8Buick.com.
Page 1 of 2 12 LastLast
Results 1 to 25 of 36
  1. #1
    Join Date
    Aug 2005
    Location
    monroe,nc
    Posts
    680

    Default Your new Diamond pistons

    Jim, now that you have built an engine with the new pistons from Diamond, were they everything you hoped they would be? Quiet? Do you have another engine together and close to the dyno with them in it? Say maybe one with TA SE heads, stock but hogged out intake and stock q-jet?
    John Looney

  2. #2
    Join Date
    Feb 2002
    Location
    Pine City, MN
    Posts
    9,737

    Default Re: Your new Diamond pistons

    Yup, they are quiet John.. and the second version of that engine should be dynoed next week.. funny... similar specs to what you said.. but it has a custom TA cam in it..



    JW
    Owner/operator

    Tri-Shield Performance
    Jim Weise
    Founder/Owner
    V-8 Buick.com
    320-629-8999

    Most folks are about as happy as they make up their minds to be.
    Abraham Lincoln
    16th president of US (1809 - 1865)

  3. #3
    Join Date
    Aug 2005
    Location
    monroe,nc
    Posts
    680

    Default Re: Your new Diamond pistons

    I will be especially interested in that test. By the way, is it 470 or 475 cubic inches and how do we get to that number from the traditional 462 or 464 we are used to seeing?
    John Looney

  4. #4
    Join Date
    Feb 2002
    Location
    Pine City, MN
    Posts
    9,737

    Default Re: Your new Diamond pistons

    John,

    Yours is a 470... That's a 4.350 bore with a 3.95 stroke on the crank.

    The first one was a 475, being that it was 4.375 Bore... as he had a very good block that was filled, for a mostly drag race application.

    ------------------

    As you mentioned, this spring I had a custom piston made up for me by Diamond racing. I have to thank Mike Phillips at AMP for getting me in contact with Diamond, as well as his input on the development of these new parts. It was something he had wanted to do for a while now, and luckily I had the projects in the hopper to order 5 sets of these, so they assigned a part number to them, and could sell them to me for the same price as a "shelf stock" piston. This allows me to retail them for the same price as other high quality Buick 455 pistons.

    The dilemma we have faced for many years is excessive decking to run a zero deck clearance, with the readily available pistons. It was not at all uncommon to have to cut .050 off the deck, to get that zero deck. And zero deck is very important, for engine efficiency and power, as well as detonation control.

    And when you do that, you have to cut the intake side of the heads to align the intake again.. it all adds up, as milling is not inexpensive. It ends up being lot of wasted motion, and although I will confess it might not be a big deal, but taking more material off an already weak block, simply can't be advantageous.

    The next thing to deal with is rods.. While stock rods are fine for up to about 500 HP in a street application, the advent and widespread use of Aluminum heads these days has made that once rather elusive mark, for a street engine, to be a rather easy goal. So we are now really working the stock rods, and after ARP bolts, re-size and an often tough balance job, you end up with around $300 in a set of stockers.. That's if you have a set of 8 that can be re-done and balanced.. That not being the case was so common, I typically bring in 10 stock rods to get 8 good ones, and that's after I have picked thru my cores to throw out the obviously poorly machined or cast ones.

    I would be remiss not to mention the TA Sportsman rod here.. That's really a great quality rod, no doubt, I have used many, many sets. It's certainly the easy rod for a "drop in" replacement, for you guys having machine work done at maybe a less than "savvy" machine shop. I will get to that later.

    But being a drop in replacement, it has to work with available Buick pistons, in both the pin diameter and compression distance, so we are now back to the massive decking issues.

    Recently, Wiseco came out with a new Buick piston. Several builders were going to Pontiac Rods from Cat, and modifying them for Buick use. Some were going to the H Beam BBC rod from Eagle Specialty products down in Miss.. That Eagle rod is a great value, plenty strong up to 700 HP, and it's a good quality piece.

    These builders were using a 6.635 long Cat Pont or Eagle BBC rod and turning the crank down to fit it, and/or narrowing the rods. Also on both rods, the pin end had to be opened up for the 1" Buick pin, that the Wiseco pistons have.

    The drawback here is twofold.. Extra machine work on the rods to fit the Buick crank for the pont stuff, or on the crank for the BBC stuff. As well as the pin end machining on both rods. More of a problem is that you really do have to surface the block at least .020 to clean it up completely. Most of the Wiseco/Cat/Eagle combos require a 10.560 deck height, which only gives you maybe .010 to clean up the decks. I have seen a few cases where that's not enough.

    Beyond that, that Wiseco piston is not a quite piece during cold engine operation. Trust me, if you put them in at the recommended .005 clearance, you will swear the thing has a rod knock when it's cold. Especially on the milder cam/iron exhaust manifold stuff. Been there, done that. One we did this last fall was so bad, I wouldn't let it leave the shop, and ended up replacing the shortblock, as it turned out, with the TA/SRP pistoned shortblock that we originally built for you John..

    I thought a better option was to have a new piston created.

    We use the Eagle rod, but having the ability to do it now with the custom piston, we went with a 6.800 length. The longer rod is easier on the cylinder walls, which is a big plus when your working with the rather thin wall thicknesses that most of our Buick blocks have.

    In addition to that, we had the piston designed for a 10.550 deck height, a .050 offset grind on the crank, and offset the pins for quiet cold operation, even with the superior 2618 material. And we specified them to be built with the .990 pin dia, so that eliminates any work required to the rods, beyond the normal pin fit.

    The key to the combo is having access to a good crank man, and I am blessed with having one of the best in the business at my disposal. The rod pins are offset ground .050 to fit the stock size BBC big end, and use the infinitely available BBC rod bearing. Want .001 under bearings.. no problem.. hard bearings, soft bearings, dowel end bearings.. you name it. Easy and cheap.. I chuckled at my cost for a set of ACL BBC rod bearings.. it was about $25 less than the Buick bearings..

    But back to the crank.. To fit the rods, beyond the offset grind down the the 2.200 inch size, the rod pin on the crank has to be widened to 1.995 to accommodate the wider BBC rod bearing, and allow for a nice .015 side clearance, and you can just get there with the stock Buick crank. But the key here in widening is having a good crank man that dresses his grinding wheel properly, to not burn the crap out of the cheeks, and produce a nice finish. Not every grinder is capable of this, or maybe more correctly stated that they will not take the time and effort to do it right.

    The advantages of this combo are:

    More cubes from the longer stroke
    Better rod ratio with the longer rods
    Easier on the cylinder walls
    Lighter pistons and pins
    Offset pins for quiet cold operation, even with the better 2618 piston alloy.
    Drop in fit for a $450 set of 700+HP H-beam rods
    No excessive decking or intake fit problems, but enough room for complete deck cleanup.
    Wider rod bearings to better handle the loads
    A huge choice of rod bearing types. Along with easy availabity and lower cost.
    And of course they have the performance oriented 1/16 compression rings.

    All this adds up to a stronger engine, for a very attractive price.

    I use a P bearing with a smaller rod journal radius on motors up to 650HP, as they work fine, and don't require surface hardening of the crankshaft. This keeps the costs down.

    On motors beyond 650 HP, we go to the H series bearings, which allow a bigger radius on the rod journals, and then we nitride the crank to harden it for the H type bearing.



    This is all done in preparation for the future. We are going to need a strong rod with wider bearings to handle the loads. Our BBB street/race motor future lies directly with that TA Tomahawk block. Power output on these street motors will be impressive, and I already have a development block on order, to build multiple combinations for killer street strip motors..

    I truly believe that 650-700+ Street friendly Naturally aspirated HP is on our near future.. and with forced induction.. well then your pocketbook is the limit, not the parts..

    Stay tuned..


    JW
    Owner/operator

    Tri-Shield Performance
    Jim Weise
    Founder/Owner
    V-8 Buick.com
    320-629-8999

    Most folks are about as happy as they make up their minds to be.
    Abraham Lincoln
    16th president of US (1809 - 1865)

  5. #5
    Join Date
    Aug 2005
    Location
    monroe,nc
    Posts
    680

    Default Re: Your new Diamond pistons

    Thanks Jim.
    John Looney

  6. #6
    Join Date
    Jul 2003
    Location
    Netherlands
    Posts
    1,069

    Default Re: Your new Diamond pistons

    John,



    JW is almost ready to ship the 475 to me, so I will let you know how the Diamond pistons sound!

    I'm looking forward to my first "quite" 475 diamond pistoned race engine!


    Greetz

    Robert
    Robert Noeken
    72 Buick GS"X" TSP Build 475CID TASTAGE1TE 350CFM/TA SP2A/950CFMcarb/TA308S/Eagle H-beam BBC Rods/Stock Crank/Diamond forged pistons/Moroso external oilpump+relocated oilfilter/grooved block+bearings/oil line to rear of block/ 3/4 block fill/MSD Pro Billet /Meziere electric waterpump/ 649HP@622Torque
    First testruns: 10.76@117MPH
    Hometown The Hague, The Netherlands "Go Fast! The taste of Adrenaline"

    Check out GofastBuick at youtube:http://www.youtube.com/user/GofastBuick

  7. #7
    Join Date
    Aug 2005
    Location
    monroe,nc
    Posts
    680

    Default Re: Your new Diamond pistons

    Opa,
    The words "quiet "and "600+ HP race engine" don't seem to go together!

    I know you are excited to put it in your car and see what it will do. Good luck.
    John Looney

  8. #8
    Join Date
    Oct 2004
    Location
    NE Ohio
    Posts
    690

    Default Re: Your new Diamond pistons

    loon,
    I hope you don't mind me piggybacking a couple questions on here...

    Jim,
    With the new pistons, what compression is a zero-decked motor with 64cc heads?
    How much do you charge for an assembled short block with all of your typical attention to detail; oil mods, etc?
    This sounds like a great way to go.

  9. #9
    Join Date
    Feb 2002
    Location
    Pine City, MN
    Posts
    9,737

    Default Re: Your new Diamond pistons

    Jadebird..

    With 64 cc heads the 470 shortblock produces 10.6-1 compression.

    As to a price, easiest way for me to do this, and include all the individual parts prices, as well as show what machining and labor operations are done, as well as the core charges for the block and crank, was to do an actual invoice..

    here it is

    PG 1



    PG 2



    You supply the cores, and it's right around 5K.. which is considerably cheaper than I have built previous aftermarket rod motors.

    And you don't have to cut the heads, which allows you to take your current heads and bolt them right on..

    Add your heads, intake/carb, timing cover, oil pan and ignition, and go out and beat up on some brand X'ers

    In the future, I plan on having these shortblocks in stock... for immediate delivery..

    JW
    Owner/operator

    Tri-Shield Performance
    Jim Weise
    Founder/Owner
    V-8 Buick.com
    320-629-8999

    Most folks are about as happy as they make up their minds to be.
    Abraham Lincoln
    16th president of US (1809 - 1865)

  10. #10
    Join Date
    Oct 2004
    Location
    NE Ohio
    Posts
    690

    Default Re: Your new Diamond pistons

    Thanks... looks real good. Is that internal balance or external?

  11. #11
    Join Date
    Feb 2002
    Location
    Pine City, MN
    Posts
    9,737

    Default Re: Your new Diamond pistons

    External balance

    I only internal balance motors designed to run beyond 6500 rpm.

    JW
    Owner/operator

    Tri-Shield Performance
    Jim Weise
    Founder/Owner
    V-8 Buick.com
    320-629-8999

    Most folks are about as happy as they make up their minds to be.
    Abraham Lincoln
    16th president of US (1809 - 1865)

  12. #12
    Join Date
    Dec 2003
    Posts
    2,630

    Default Re: Your new Diamond pistons

    Jim, what is the comp. height and weight of the pistons?
    Ray

  13. #13
    Join Date
    Feb 2002
    Location
    Pine City, MN
    Posts
    9,737

    Default Re: Your new Diamond pistons

    Comp Height- 1.775

    Weight- 803g with pin- (piston 650g pin 153g)

    JW
    Owner/operator

    Tri-Shield Performance
    Jim Weise
    Founder/Owner
    V-8 Buick.com
    320-629-8999

    Most folks are about as happy as they make up their minds to be.
    Abraham Lincoln
    16th president of US (1809 - 1865)

  14. #14
    Join Date
    Mar 2002
    Location
    San Diego
    Posts
    255

    Default Re: Your new Diamond pistons

    How do these pistons compare to a JE and the Eagle rods against a Crower Sportsman rod? I am building another supercharger motor and am looking for a shortblock for my Stage 2 TE heads with max effort port by Gessler and 15 to 18 lbs of boost via a Vortech.

  15. #15
    Join Date
    Feb 2002
    Location
    Pine City, MN
    Posts
    9,737

    Default Re: Your new Diamond pistons

    The Diamond Pistons are 2618 material, which is stronger than the 4032 I believe many SRP/JE pistons are made out of. You can typically tell which material is being used by the piston/wall clearance required.. 2618 expands more, and requires about a thou and a half more clearance.. Many 4032 forged pistons will go in at .0025-.003, where as the 2618 stuff has to go in at .0045-.005. There certainly are some JE pistons out there made with 2618. In that case, I would say that piston to piston, durablity is a wash..

    But the issue here is all about deck height, and what it takes to put that piston in the block, not to mention a longer rod to decrease the forces on the cylinder walls.


    As far as rods, I would say that the Eagle H beam rod, would compare favorably with the crower forged rod.


    Thanks

    JW
    Owner/operator

    Tri-Shield Performance
    Jim Weise
    Founder/Owner
    V-8 Buick.com
    320-629-8999

    Most folks are about as happy as they make up their minds to be.
    Abraham Lincoln
    16th president of US (1809 - 1865)

  16. #16
    Join Date
    Sep 2007
    Location
    New Jersey
    Posts
    6,604

    Default Re: Your new Diamond pistons

    I guess I have to start saving some cash!!!!


    Sounds like a great deal.

    Thanks to Jim for making any of this stuff possible.
    NY Chicago 64 65 Posse

    GSCA # 3741
    BPG # 1991
    494 Stroker, in the works
    2002 White Diamond Cadillac DeVille
    1965 GranSport 4 speed Coupe (Under Resto)
    1965 Skylark 462 12.21@109.8
    1964 Special Fireball V6, 3 on the tree! Sold
    1987 Grand National
    1987 SS Monte T-Tops 4sale..Gone. BACK!! Sold
    1995 Slammed Asstro
    17 in Boyd Coddingtons
    Daily Driver: retired :(
    1998 2 Door Blue Tahoe New
    Daily Runner, Garage kept Gem! :)

  17. #17
    Join Date
    Mar 2002
    Location
    San Diego
    Posts
    255

    Default Re: Your new Diamond pistons

    I appreciate the quick response.

  18. #18
    Join Date
    Jul 2003
    Location
    Netherlands
    Posts
    1,069

    Default Re: Your new Diamond pistons

    JW,

    I'm getting complaints from my race buddy, that they don't hear me running down the track anymore.

    Since this new 475 diamond piston engine is in the car, the only thing they can hear when I go down the track is a woosshhing sound.

    I'm using 3 1/2 full exhaust with a X-pipe and Dynomax race mufflers, but is so quite I can listen to the radio when I go down the track!

    Last weekend we race the car (on friday and saturday) we made 17 runs and the last 4 runs the car was going faster and faster untill my posiunit started to slip under the pressure of al this Torque.

    Fastest time for now is 11.13 and still the same end speed of 117MPH!
    With 3.73 gears still, going to 4.56 gears this winter.
    Last edited by Opa; 08-25-2009 at 01:59 PM.
    Robert Noeken
    72 Buick GS"X" TSP Build 475CID TASTAGE1TE 350CFM/TA SP2A/950CFMcarb/TA308S/Eagle H-beam BBC Rods/Stock Crank/Diamond forged pistons/Moroso external oilpump+relocated oilfilter/grooved block+bearings/oil line to rear of block/ 3/4 block fill/MSD Pro Billet /Meziere electric waterpump/ 649HP@622Torque
    First testruns: 10.76@117MPH
    Hometown The Hague, The Netherlands "Go Fast! The taste of Adrenaline"

    Check out GofastBuick at youtube:http://www.youtube.com/user/GofastBuick

  19. #19
    Join Date
    Feb 2002
    Location
    Pine City, MN
    Posts
    9,737

    Default Re: Your new Diamond pistons

    Sounds good Robert, glad your having some fun with it.

    Ya, tell your buddies "Too bad"..

    Combo will like those gears..

    Take care, say HI to the Mrs. for me..

    JW
    Owner/operator

    Tri-Shield Performance
    Jim Weise
    Founder/Owner
    V-8 Buick.com
    320-629-8999

    Most folks are about as happy as they make up their minds to be.
    Abraham Lincoln
    16th president of US (1809 - 1865)

  20. #20
    Join Date
    Jul 2003
    Location
    Netherlands
    Posts
    1,069

    Default Re: Your new Diamond pistons

    ]I said Hi to the mrs, and you get a BIG Kiss back from here.

    Was fun to beat a 1978-80 Z28 Camaro who had a new 540 Merlin III 650HP engine powering it.
    It did a 11.28ET on the 1/4mile.

    You can feel that the engine is coming "loose" as we say it here, and releasing the power more and faster.

    Last edited by Opa; 08-26-2009 at 05:08 AM. Reason: To place a picture of last weekend runs we made
    Robert Noeken
    72 Buick GS"X" TSP Build 475CID TASTAGE1TE 350CFM/TA SP2A/950CFMcarb/TA308S/Eagle H-beam BBC Rods/Stock Crank/Diamond forged pistons/Moroso external oilpump+relocated oilfilter/grooved block+bearings/oil line to rear of block/ 3/4 block fill/MSD Pro Billet /Meziere electric waterpump/ 649HP@622Torque
    First testruns: 10.76@117MPH
    Hometown The Hague, The Netherlands "Go Fast! The taste of Adrenaline"

    Check out GofastBuick at youtube:http://www.youtube.com/user/GofastBuick

  21. #21
    Join Date
    Feb 2002
    Location
    Pine City, MN
    Posts
    9,737

    Default Re: Your new Diamond pistons

    Quote Originally Posted by Opa View Post
    I said Hi to the mrs, and you get a BIG Kiss back from her.



    Apparently another satisifed customer...

    JW
    Owner/operator

    Tri-Shield Performance
    Jim Weise
    Founder/Owner
    V-8 Buick.com
    320-629-8999

    Most folks are about as happy as they make up their minds to be.
    Abraham Lincoln
    16th president of US (1809 - 1865)

  22. #22
    Join Date
    Mar 2002
    Location
    Manitowoc, WI
    Posts
    2,090

    Default Re: Your new Diamond pistons

    Jim,
    What part number did Diamond give this piston? I have a set of Diamonds in my 470 that have been in there for about 4 years now. They were a custom order by Jack Merkel Racing Engines and they do have a Buick specific part number. I can get the number if you're interested. It sounds like my "old" 470 is very similiar to what you're putting together now, except mine has Scat rods(6.800). Same import blank, just machined by a different company. I LOVE this engine! Best one I've ever put together. All I need now are aluminum heads and a 308s cam.......... Here we go again!!!

    Steve
    Steve, SRE Performance Fabrications Inc. 920-629-6565 evenings/weekends

    * 70 GSX race car 9.31 @ 143 mph 1.21 60' SOLD
    Super 16 Winner GSCA Nats 2011
    New Project... 64 Skylark motivated by a "Tomahawk". Will be known "Alpha Lark".

  23. #23
    Join Date
    Feb 2002
    Location
    Pine City, MN
    Posts
    9,737

    Default Re: Your new Diamond pistons

    Steve,

    PN is 801TRI

    It's specific for dish volume, offset pin ect, so it was a new deal with them, although I am sure they have built similar pistons in the past, which you probably have.

    Good combo.. built a few of them now, and am very happy with the performance of that piston, and the ease of installation to get a zero deck. I certainly don't miss all the work to deck the block a ton, then have to cut the intake side of the heads to make everything fit.. and my customers don't miss paying for all that..

    Here are a couple pics of the piston





    JW
    Owner/operator

    Tri-Shield Performance
    Jim Weise
    Founder/Owner
    V-8 Buick.com
    320-629-8999

    Most folks are about as happy as they make up their minds to be.
    Abraham Lincoln
    16th president of US (1809 - 1865)

  24. #24
    Join Date
    Mar 2002
    Location
    Manitowoc, WI
    Posts
    2,090

    Default Re: Your new Diamond pistons

    Thanks Jim,
    Yes, I'm real happy with the Diamond stuff so far. The only issue I've had with them are the pistons in my engine had the wrong diameter flycut on two of the pistons. I had to re-cut them to match the other six and re-balance them. At least they were smaller than needed and not larger! lol Honest mistake I guess. They would have fixed them for me, but why bother with the shipping and waiting when I had them done in an hour or so.

    Keep up the good work!!

    Steve
    Steve, SRE Performance Fabrications Inc. 920-629-6565 evenings/weekends

    * 70 GSX race car 9.31 @ 143 mph 1.21 60' SOLD
    Super 16 Winner GSCA Nats 2011
    New Project... 64 Skylark motivated by a "Tomahawk". Will be known "Alpha Lark".

  25. #25
    Join Date
    Jun 2008
    Location
    long island ny
    Posts
    971

    Default Re: Your new Diamond pistons

    I have Jim building me one of these 470" bad boys............

    Steve......your old stage 2 heads are gonna have a good home

    Now..........If I can only decide on what cam I want

    Last edited by rack-attack; 08-31-2009 at 03:56 PM. Reason: spelling


    1971 SKYLARK
    Built to scare children and old ladies

    Chuck Hensel

 

 
Page 1 of 2 12 LastLast

Similar Threads

  1. 350 forged 12-1 flat top pistons
    By Mike Phillips in forum Small Block Tech
    Replies: 3
    Last Post: 09-01-2008, 12:21 PM
  2. v6 pistons...
    By mhgs in forum Small Block Tech
    Replies: 14
    Last Post: 10-19-2007, 09:53 PM
  3. Turbo/blower pistons already available???
    By Darryl Roederer in forum Small Block Tech
    Replies: 15
    Last Post: 08-26-2002, 01:45 PM
  4. 401 pistons in +.040 where are you?
    By 66riv in forum 'Da Nailhead
    Replies: 2
    Last Post: 02-23-2002, 12:01 AM
  5. 350 pistons, etc.
    By David Gramlow in forum Small Block Tech
    Replies: 3
    Last Post: 02-07-2002, 05:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to top