Welcome to V8Buick.com.
Results 1 to 13 of 13
  1. #1
    Join Date
    Mar 2009
    Posts
    4

    Default 1968 Buick 350 V8 Engine 4 Barrel Intake Manifold

    Hello I am looking for an intake manifold for buick 350 4 barrel. Is this the same intake manifold on all the 350 buick?

    Thank you !

    Benwin

  2. #2
    Join Date
    Aug 2002
    Location
    reinholds,pa
    Posts
    121

    Default Re: 1968 Buick 350 V8 Engine 4 Barrel Intake Manifold

    I have a 71 $75 plus shipping 17569
    Cork

  3. #3
    Join Date
    Mar 2009
    Posts
    4

    Default Re: 1968 Buick 350 V8 Engine 4 Barrel Intake Manifold

    Do you have pictures? Do you know if the intake manifold is the same throughout the 350 buick?

    Tank you !

  4. #4
    Join Date
    Feb 2002
    Location
    Topeka Kansas
    Posts
    14,947

    Default Re: 1968 Buick 350 V8 Engine 4 Barrel Intake Manifold

    I have a 70 intake for $50 plus shipping where are you located?
    Michael Garrison
    High Torque Racing
    Topeka Kansas
    GSCA#411
    BPG #1022
    1970 GS Stage1 (wifes car) 12.78@104 all by herself!!
    1970 GS 455-BUZILLA 538 826HP
    10.18@135.6 so far thru the muffs
    I repo & sell parts!! Find us on facebook

  5. #5
    Join Date
    Jun 2007
    Location
    Connecticut
    Posts
    2,407

    Default Re: 1968 Buick 350 V8 Engine 4 Barrel Intake Manifold

    There are differences.

    the 68-9 intakes have round pedestals that hold up the rear part of the carb baseplate where the carb bolts go, while the 70s units have a solid metal pad as a provision for the second pulloff can vacuum channel in the baseplate.

    There are different styles of Choke thermostat

    Some have the AIR passages
    Some have EGR

    That said, they all are interchangeable on any 350, you might just have to block/plug the AIR or EGR or whatever.

    Thats all I can think of off hand
    Ken G
    www.everyday-performance.com
    on Facebook

    NE GS/GN
    83 Olds Cutlass (w/78 Buick 231 TURBO)
    72 Skylark 350 w/ Nitrous (12.87 @ 104.79 on 100 shot) SOLD
    "My mule dont like people laughin'..."


  6. #6
    Join Date
    Mar 2004
    Location
    Edmonton Alberta
    Posts
    13,517

    Default Re: 1968 Buick 350 V8 Engine 4 Barrel Intake Manifold

    My advise is search your area and call the wreckers, shipping is killer on there!
    __________________________________________________ ________________________________________
    My book called Small Block Buick Performance covering the V6, 215, 300, 340, and Buick 350 engines will be released soon.

    http://www.v8buick.com/forumdisplay....rformance-Book
    __________________________________________________ __________________________________________________ _________________________________
    1970 Buick Skylark 350 street/strip with 6 point cage: Custom tube headers feed Twin T3/T4 Turbochargers, Holley 650, sheet metal single plane intake, heavily ported iron heads with oversized valves, mild Poston 114 camshaft (2800-6000 RPM), Diamond forged pistons on Hershe forged rods, balanced, ARP everywhere, dual 3" exhaust, Paddle shifted 4L80E 4 speed overdrive, Moser 12 bolt with 3.42 gear.

  7. #7
    Join Date
    Mar 2007
    Location
    farwell MICHIGAN
    Posts
    77

    Default Re: 1968 Buick 350 V8 Engine 4 Barrel Intake Manifold

    HI i have two from 68-69 buick 350 4bl. do you live near michigan thanks gransportw

  8. #8
    Join Date
    Jan 2011
    Posts
    5

    Default Re: 1968 Buick 350 V8 Engine 4 Barrel Intake Manifold

    I am Interested in locating one also

  9. #9
    Join Date
    Apr 2003
    Location
    UNADILLA,N.Y. - upstate man , UPSTATE !
    Posts
    2,742

    Default Re: 1968 Buick 350 V8 Engine 4 Barrel Intake Manifold

    yeah - keep an eye out for yards that maybe don't crush all the older stuff . when you are out cruisin peek out behind them barns etc . if ya know some guys that have older stuff they drive ( chev ford mopar anything ) alot of times they know people that know people . check with the old dudes at the car parts counters . sometimes buying a whole car is good , use a few parts , sell a few parts . and use wise purchasing skills so ya don't spend more than ya should . del
    DEL EMERSON 1965 SPECIAL/350/MUNCIE M-21/9"
    "YA' CAN'T ALWAYS PUT OFF THINGS YA' WANNA' DO FOR THINGS YA' HAVE TA' DO!!
    GSCA#4436 BPG#1579

  10. #10
    Join Date
    Jan 2005
    Location
    Collins NY
    Posts
    703

    Default Re: 1968 Buick 350 V8 Engine 4 Barrel Intake Manifold

    I have 71 buick 350 4 barrel intake $75.00 & shipping. Thanks Ron
    Ron
    1967 GS400
    1969 GS California
    1972 GS (kids)
    German Shepherd named Skylark

  11. #11
    Join Date
    Jun 2010
    Posts
    849

    Default Re: 1968 Buick 350 V8 Engine 4 Barrel Intake Manifold

    I have one from a '68, $125/shipped

  12. #12
    Join Date
    Jan 2011
    Posts
    5

    Default Re: 1968 Buick 350 V8 Engine 4 Barrel Intake Manifold

    Dans gs Im in Ontario Canada. shipping still good?

  13. #13
    Join Date
    Jun 2010
    Posts
    849

    Default Re: 1968 Buick 350 V8 Engine 4 Barrel Intake Manifold

    Quote Originally Posted by grndprxdriver View Post
    Dans gs Im in Ontario Canada. shipping still good?

    $175/shipped to Canada

 

 

Similar Threads

  1. 1970 Buick 350 engine and trans for sale
    By Crazyfirefightr in forum Parts for sale
    Replies: 7
    Last Post: 01-04-2009, 11:42 PM
  2. need info on buick bb intake offenhouser 360* 4 barrel
    By 72gsBuick in forum Street/strip 400/430/455
    Replies: 8
    Last Post: 11-05-2007, 11:58 PM
  3. vac advance
    By whamo in forum Street/strip 400/430/455
    Replies: 6
    Last Post: 04-07-2007, 12:44 PM
  4. 70-72 Monte Carlo rear-same as skylark
    By jmccart in forum Got gears?
    Replies: 4
    Last Post: 09-09-2005, 09:13 PM
  5. 68 Buick 350 - 2 barrel Manifold & Heat Riser Needed
    By Buickbabe in forum Parts wanted
    Replies: 1
    Last Post: 10-22-2004, 04:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to top