Welcome to V8Buick.com.
Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2016
    Location
    Las Vegas
    Posts
    2

    Question Dynaflow woe....

    Howdy all! I'm kitty and I'm new around here, hoping to learn about Buick's and get some help getting my new love back on the road. My husband recently got me '63 Buick Wildcat. She's my daily driver and has been going pretty good for the last 4 months. Recently she decided to test us. Her dyna took a massive dump in the parking lot. We pulled it and bought a rebuilt one we found in an effort to save some money. Well..... The new one did the same thing. Dumped everywhere and I don't have drive, only reverse. The new / old trans came out of a 64 la saber and had done 200 miles. The guy swapped it for more power, so I have no reason to believe it was necessarily a bad trans. We have it possibly narrowed down to a few things. One, the hub may not have put enough fluid in before we started it, only 3 pints. So probably didn't suck down in to the torque converter. 2 we may have over filled it, and blown the gasket causing the leak. Three.... From what I have been told there is a belt in there that is much like break material and grabs when your in drive giveing it enough ooph to push this big cat forward. It does not appear that it was tight. The hub tried adjusting it. The wheels turn but there isn't enough there to move the car with the wheels down. Also.... The fluid that came out is like glitter paint... Bad I know. Any advice? Anything I can try to get her back on the road? With out breaking the bank preferably. Or am I just better off to suck it up and have it rebuilt? And what is a fair price for a rebuild? The quote I got before was $900 to start. Seems high to me but we do all our own work on Our cars and I haven't gone to a shop for anything in 5 years. I'm open to any advice and suggestions I just want to be back on the road in my baby!

  2. #2
    Join Date
    May 2014
    Location
    Caledonia, MI
    Posts
    4,722

    Default Re: Dynaflow woe....

    Welcome, Badkitty. I'm not a transmission expert, so I'm not going to speculate on what could have gone wrong. I do have a Dyna-flow in my '62 LeSabre, so I'll be following this thread. I'm certain that there are guys/gals on here that have the answers you seek. I hope your Buick is back to purrfect soon, Kitty.
    Jerry
    '62 LeSabre 4dr. sedan
    '65 Skylark convt.
    '67 Skylark 2dr. hdtp.
    '30 Ford Roadster pickup
    '68 Nova SS
    '69 Z/28 RS apart
    '70 Camaro RS race project
    '71 Z/28 RS
    '73 Beetle convt. project
    '78 Futura
    '78 Fairmont wgn project
    '83 Olds Delta 88 Royale
    '88 Dakota
    '92 Plymouth
    '05 Silverado 4x4
    '14 Dodge Journey Blacktop edt.
    My name's Jerry and I'm a caraholic.

  3. #3
    Join Date
    Jun 2010
    Location
    near Birmingham (Alabaster)Alabama
    Posts
    12,247

    Default Re: Dynaflow woe....

    $900 is not bad
    Did you have it rebuilt?


    Sent from my iPhone using Tapatalk
    "Bulldog" James A. Miller

 

 

Similar Threads

  1. 64 401 to Dynaflow
    By supersteve in forum 'Da Nailhead
    Replies: 7
    Last Post: 10-03-2016, 06:38 PM
  2. 56 Dynaflow
    By DannyD in forum The "Juice Box"
    Replies: 6
    Last Post: 04-10-2013, 09:58 PM
  3. F/S - '63 401 & Dynaflow
    By nailheadnut in forum 'Da Nailhead
    Replies: 0
    Last Post: 08-14-2012, 09:23 PM
  4. dynaflow
    By rusty*metal in forum Classic Buicks
    Replies: 4
    Last Post: 08-20-2008, 11:49 AM
  5. 55 dynaflow help
    By 55special in forum Classic Buicks
    Replies: 4
    Last Post: 01-19-2005, 03:16 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to top