Welcome to V8Buick.com.
Results 1 to 7 of 7
  1. #1
    Join Date
    Feb 2016
    Location
    Nebraska
    Posts
    144

    Default 455 induction and power potential

    When I hear of guys building big power in a 455 I usually hear of them using a single 4 intake. Are the dual 4, tri power, or injected intakes not worth the cost or do they rob hp? I have heard that offy intakes usually rob power (In nailheads and bbb)
    BCA and 1959 Division Member

    Current Owned Buicks
    1970 Electra 225 Convertible (loaded + factory tow package and posi) (455 powered of course)
    2002 Rendezvous CXL

    Current spare motors
    1959 364 nailhead (rebuilt from the ground up)
    1975 Buick 455 (future motor for the Electra)

    Previously owned Buicks
    5 1959 LeSabres (2dr and 4dr including factory stick shift)
    2 1958 Specials (4drs)
    1 1997 Riviera Supercharged

  2. #2
    Join Date
    Feb 2002
    Location
    Oakland Gardens, N.Y.
    Posts
    27,206

    Default Re: 455 induction and power potential

    Dual Quad has been discussed here, http://www.v8buick.com/showthread.ph...-Dual-Quad-BBB

    I am unaware of any tri power intake available for the BBB.

    Fuel injection offers better drive ability and self tuning. I'd like to do that eventually, but I will wait as I feel better systems are in the works.
    Larry
    1998 "Fully Optioned" SC3800 Riviera
    70 GS 455 Stage1, TSP 470, 602 HP@ 5900, 589 TQ @ 4900
    TA Hyd Roller Cam, 230*/238*, 112, .544"/.577" lift, 4-7 swap
    MSD Digital 6+, Ignitionman Distributor w/MSD trigger
    THM400 with Ultimate 258mm converter, Gear Vendors OD
    AED 1000 HO Carb, 800 CFM 7042240 Quadrajet
    8.5 10 bolt, 3.73's Race weight 4025lbs.
    Best E.T. 11.54 Best MPH, 116.06
    Larrymta@verizon.net, GSCA #291
    BPG # 1063
    N.E. GS/GN Club Assistant Director

  3. #3
    Join Date
    Nov 2013
    Posts
    1,471

    Default Re: 455 induction and power potential

    Tall deck engines and modern single plane intakes work very well together by utilizing both an easier transition to the heads and the benefit of intake ramming via wave reflection acoustics.

  4. #4
    Join Date
    Mar 2004
    Location
    Edmonton Alberta
    Posts
    15,229

    Default Re: 455 induction and power potential

    Ported alum heads are the key to easy power.
    __________________________________________________ __________________________________
    My book called Small Block Buick Performance covering the V6, 215, 300, 340, and Buick 350 engines will be released soon.

    http://www.v8buick.com/forumdisplay....rformance-Book
    __________________________________________________ ____________________________
    1970 Buick Skylark Turbo 350 street/strip

  5. #5
    Join Date
    May 2010
    Location
    Southwest Ohio
    Posts
    5,022

    Default Re: 455 induction and power potential

    Quote Originally Posted by sean Buick 76 View Post
    Ported alum heads are the key to easy power.
    ^^^This!^^^ A set of decently ported aluminum heads really opens Pandora's box as far as power goes in these Buicks. Some guys make really good power with good ported iron heads as well, but aluminum heads make it easier (and have some other benefits as well). Even then it's still key to have a combo that works well together, but the heads are a big part of it.
    Shawn
    "I drive too fast to worry about my cholesterol..."
    -72 Skylark- Project "Rusty Hulk"- 462ci 4 speed street bruiser
    Build Thread: http://www.v8buick.com/showthread.php?293656-Build-Thread-Project-Rusty-Hulk
    -72 Skylark- The wifes ride, " Elsa " - bone stock and classy cruiser
    BPG #2288 (RIP)
    BCA Member #???? (For Now)

    "The garage looks like the house of
    Dr. Jeckyl and Mr. Hyde..."






  6. #6
    Join Date
    May 2002
    Location
    the Seasonally Frozen Wastelands
    Posts
    2,842

    Default Re: 455 induction and power potential

    Virtually all multi-carb intakes are designed for style, not for power. Tunnel rams might be an exception.

    If you're not running a tunnel ram or other tuned-port multi-carb system like the ancient Chrysler Long Rams, a multi-carb intake will do well to make AS MUCH power as a properly set up single four on a (good) performance-style manifold.

  7. #7
    Join Date
    Aug 2002
    Location
    Huntsville
    Posts
    2,559

    Default Re: 455 induction and power potential

    You can also utilize a Mopar intake with a set of adapter plates

    Sent from my SM-G935V using Tapatalk
    Scott

 

 

Similar Threads

  1. Potential New Owner
    By Bat 62 in forum Wet behind the ears??
    Replies: 0
    Last Post: 12-30-2012, 10:40 PM
  2. Potential 1971 GSX?
    By gsxnut in forum Cars and Parts For Sale Leads
    Replies: 96
    Last Post: 05-16-2009, 11:23 PM
  3. 340 Potential?
    By Snowbound in forum Small Block Tech
    Replies: 10
    Last Post: 05-17-2006, 11:42 PM
  4. ET potential
    By offbrand Racing in forum Race 400/430/455
    Replies: 25
    Last Post: 07-25-2004, 02:16 PM
  5. 430 engine potential
    By the bandit in forum Street/strip 400/430/455
    Replies: 4
    Last Post: 02-05-2004, 01:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to top