ck ouy my 1970 wildcat been sitting for almost 20 yrs it needs lots of work but it runs now:Brow: :Brow:
This radiator is available for what i have in it...fits all Big Buicks 1965-66...Riviera also i beleive.......PM me for detail What a dummy.....i should have used a 1967 radiator ou: Peace WildBill
Merry Christmas to all Wildcat Challenge parties! I've done a little - no pictures yet, but my trannie is about to get installed a little more permanently...hump is done, seam sealer and paint needed, then bleed the hydraulic clutch...shorten driveshaft some more :spank: then its pedal time as in install brake and clutch pedals. Do brakes. install dynamat. do electric harnesses...install dash...windows...back to the body shop for some finish trim...then interior change to red. I have to send my interior parts out soon.
Hi Ted, I am looking forward to seeing more pics of your car. We are having nice hot cruising weather down here now. :3gears: :3gears: Merry Christmas from downunder. :beer :beer :beer :beer :beer :beer :beer John
Cheers back at you from "upover" - we are having some nasty cold weather- I should be travelling to NZ! :beers2: :beers2: :beers2: :beers2: :beers2: :beers2: :beers2:
I would be real happy to see you down here again, it's great Tui drinking weather. :beer :beer :beer :beer :beer :beer :beer
These virgin never turned low mile rear drums are ready to GO ! Went to my friend Dale's shop to cut the steel to box in the lower control arms....i will weld 'em up tomorrow Peace WildBill
The reinforcements help on keep the arms from flexing during turns and those 'sideways' maneuvers. Maybe Wild Bill is building a 'cat for drifting.....to show up those guys with the imports. :grin: Drifting= A long smokey burnout, even around turns!
I will be "Drifting" all over the place in this car :grin: A little more progress...... Peace WildBill
You drift more than anyone I know, if this Wildcat is not done in 2009 then I don't know what to do to you, but ou: :spank: :spank: :spank: :spank: :spank: and more:spank: :spank: :spank: :spank: :spank: :spank: :blast: :3gears: ou: :beers2: :beers2: :beers2: :moonu:
Hey Girl.......can i borrow your HR Parts and Stuff bushing removal tool p I'm going to camp out in your yard the night of the Warren leg of the HotRod Power Tour :beer ........wanna bet ? :dollar: See ya soon ! Peace WildBill
So......the NOS Spyder centers are off to McWheels to be mated with some 15x7 hoops......here's a glimpse....... Peace WildBill
Thanks Hector.....they should be different at the least uzzled: Here's the A-arms with new ball joints and bushings.......time for a little painting :Brow: Peace WildBill