Pics to follow. I tore through my parts pile today to try to clean up, and here's the Buick stuff copied from my Excel file. :spank: I hate when people list stuff like this, but I just spent the better part of two hours tabulating a 100 line list in Excel Copy & Paste makes this easy for me LOL Year Make Model Motor Description Condition Price 66 Buick Skylark-Special-GS turn signal lens very good $5.00 66 Buick Skylark-Special-GS Speedometer w/ Speedminder, 109xxx mi poor$30.00 66 Buick Skylark-Special-GS Speedometer w/ 77xxx mi very good $30.00 66 Buick Special Rear Valance Upper & Lower Trim very good $75.00 66 Buick Special Fender Ports, 6 qty. Minor pitting good $30.00 64-67 Buick 8.2" 10 Bolt 2.78:1 open Rear. Drum to Drum. 100k mi very good $150.00 Buick 400-430-455 retainers (valves, 16 qty) used $10.00 Buick 400-430-455 header bolts (12 point, 14 qty) new & used $5.00 Buick 400-430-455 Factory Lift Points (intake loops) used $3.00 ea Buick 400-430-455 Detent Bracket used, painted $5.00 73 Buick Electra 455 Misc. Sensors & Switches (A/C Car) used $5.00 all 73 Buick 455 Rocker Arm Assemblies used, low mileage $35.00 SOLD Buick 400-430-455 Fuel Pump to Quadrajet Fuel Line very good $5.00 Buick 400-430-455 Fuel Pump to Intake, cut at fitting very good $3.00 73 Buick 455 Crank Pulley, dirty used $5.00 Buick 400-430-455 Misc. Oil Pump Rebuild Parts (springs, drill bits, gaskets, etc) new & used $20.00 all Buick 400-430-455 Oil Pan w/ 2 pin holes in rear, incl. bolts used $20.00 73 Buick 455 Bead Blasted Valve Covers w/ Oil Cap & Factory Hardware used $50.00 Buick 400-430-455 Starter Bolts & Shim used, dirty $3.00 Buick 400-430-455 Exhaust Manifold Bolts, incomplete set used $5.00 all SOLD 73 Buick 455 Head Bolts, 2 sets used $5.00 /set 73 Buick 455 Intake Manifold Bolts, complete used $5.00 SOLD 73 Buick 455 Alternator & A/C Pump Main Bracket used, dirty $5.00 73 Buick 455 Alternator & A/C Pump Arm Bracket used $10.00 73 Buick 455 Intake Manifold Water Neck w/ bipass used $5.00 Buick 400-430-455 Mechanical Fuel Pump, non-Stage 1 LOW MILEAGE/USEAGE used $15.00 73 Buick 455 Exhaust Heat Collector very good $3.00 73 Buick 455 Push Rods, factory length (2 sets) low mileage $15.00 /set Buick 455 Main Caps low mileage $10.00 73 Buick Electra 455 4 Blade good $10.00 68 Buick Electra Ignition Switch w/ Key very good $10.00 68 Buick Electra Trunk Lock w/ Key very good $10.00 68 Buick Electra Tri Shield Side Marker, right side. Incl Mounting Bracket good $15.00 68 Buick Electra Cornering Light w/ pigtailed wiring very good $15.00 68 Buick Electra Vacuum Operated Trunk Popper & Dash Button very good $40.00 68 Buick Electra Cruise Control Unit/Servo good $25.00 Buick Full Size Rear View Mirror, Light Colored Interior good $20.00 Buick Full Size Rear View Mirror w/ factory light & switch, Black Interior good $25.00 73 Buick Full Size Power Bucket Tracks, Left & Right Side very good $150.00 Buick 455 Stock Camshaft w/ matched lifters, 18,000 miles very good $25.00 Buick 455 Stock Camshaft good $5.00 I literally have pictures of all of this stuff but two things. Pricing does NOT include shipping (will ship from 19382 via FEDEX or USPS). Thanks! :beer
Ed Put me on the list for the following: - 73 Buick 455 Rocker Arm Assemblies used, low mileage $35.00 - Buick 400-430-455 Exhaust Manifold Bolts, incomplete set used $5.00 all - 73 Buick 455 Intake Manifold Bolts, complete used $5.00 Like photo please for the rocker arm assemblies, Thanks George ps I work near 202 and 29 in Malvern
I'm off Mondays and Tuesdays, if you want to get together I can meet you at the Rt 29 Wawa. I took about 150 pictures today on a camera that I left at the parts bin (see also: parent's house). Both are front entry. The cut line is missing the last 3 inches or so, it stops around the distributor area. The other is a full line, flares and fittings. Also, these are from non-stage cars. The Stage 1 pump is deeper (taller) than the standard pump.
I'll take the 455 exhaust heat collector, shipping to zip 48375. The stock cam shaft and matching lifters for what year and specs?
The cam & lifters were from the stock rebuilt 455 I bought on here two years ago, I googled around but couldn't come up with factory specs for the cam. It's the same motor that is now in my '66 with a different cam & heads.
No more than normal. The lobes all looked good, along with the lifters, that's why I saved it. They're coated in oil to avoid any corrosion, and they've been boxed in my basement since pulled. If you're that serious, I'll pull them out and take pics.:TU:
Bent up tray $3 Big shot of parts listed, above: Oil Pan Over all shot: Cruise Unit Mirrors Ign & Trunk 68 Lens 68 Cornering
66 Special Vents 2bbl-4bbl air cleaner 66 front lens 2.25" glass pack exhaust FREE (pick up only) tail pipes need welded back onto packs. 67 chevelle column shift w/ flasher Old School Add-On Cassette Deck-Panasonic $40
I will take the exhaust heat collector, the cam and lifters if they have been marked for which lobe they go to(otherwise they will wear out fast when installed) and the oil pump rebuld kit. Can you let me know what shipping would be for these parts?
The oil pump stuff isn't a complete kit, and the lobes are marked for each lifter with the stock cam. I'll get you a quote on shipping once I box it all together, should take me a day or two. Thanks
73 Buick 455 Intake Manifold Water Neck w/ bipass used $5.00 Is that a stamp steel or cast? Will it fit a 350?
I think I'm the only guy in the world who had a stamped steel one stock. You can see I had to weld a new neck on mine but the main body is stamped, not cast. I carry one of them cast ones just incase I spring a leak. But want a stamped one.
Do you still have the 1973 Full Size Power Bucket Seat Tracks? If so, could you post photos. Thanks...Will