F.A.S.T. HEMI dyno

Discussion in 'Stock Appearing' started by Dave Dudek, Jan 16, 2010.

  1. Dave Dudek

    Dave Dudek Well-Known Member

    OK, after 3 solid years of racing I finally pulled the Hemi out to be freshen up.

    I took the Hemi over to Modern Clyinder Head a couple days ago and today we fired her up to get some "before" results before we tear into her. After about 160 passes, 7500 shifts, 7700 through the traps, here`s what she did. We did not move the timing or jet the carbs as of yet. Click here to see dyno sheets: Dyno Sheets Click HERE!! 770HP

    For video click picture below:

    [​IMG]



    Just thought you guy`s might enjoy it... :thumb:
     
  2. CameoInvicta

    CameoInvicta Well-Known Member

    Very very cool :TU: !

    Can you share any details on the motor, or is it top secret?
     
  3. flynbuick

    flynbuick Guest

  4. Eric

    Eric Founders Club Member

    I didn't know Buick made a Hemi ? :Do No:
     
  5. Dave Dudek

    Dave Dudek Well-Known Member

    They didn`t.. That`s why this is posted in the "The Other Guy`s" section.:TU:
     
  6. ToddsGS

    ToddsGS Founders Club Member

    Very Impressive numbers. Your cars overall are very impressive.

    You've definately helped bring some recognition to this type of racing.
     
  7. low buck Jim

    low buck Jim Well-Known Member

    Very cool Dave! Now I see why your top-end charge is so incredible.
     
  8. Hector

    Hector '79 Buick Limited

    Dave,I saw that bullet in Richmond a while back,very impressive runs.It is very cool of you to post here about it,this will be a very good thread to follow.Thanks and good luck with it.
     
  9. td99

    td99 Well-Known Member

    sweet Dave, what do your heads flow?

    Cody
     
  10. Dave Dudek

    Dave Dudek Well-Known Member

  11. low buck Jim

    low buck Jim Well-Known Member

    You are family here Dave. Dont listen to gary, he has a total of 3 post.
     
  12. flynbuick

    flynbuick Guest

    I do not see anything except for another Hemi or a L88 competing with that level of power in the FAST class. The Plymouth looks like showroom also. Just one night on the town with it could really hurt some feelings stoplight to stoplight.
     
  13. Dave Dudek

    Dave Dudek Well-Known Member

    Actually, I believe this year your gonna see a Pontiac 400 and a 429 Ford dip into the 10.30`s and 133+ and these guy`s will win races this year. I posted this topic here not to brag on the Hemi, i thought it might be interesting to some of you guy`s. Normally everybody keeps everything so secretive..
     
  14. CameoInvicta

    CameoInvicta Well-Known Member

    Again Dave, very cool. Thanks for sharing. That's one helluva Hemi!
     
  15. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    Right on, Dave. F.A.S.T. is way cool!:TU:
     
  16. Eric

    Eric Founders Club Member

    These fellows must be using Buick cams to go that fast.
     
  17. flynbuick

    flynbuick Guest

    Can factory heads for Pontiac flow in the 400 range? Since a 429 was a Ford Hemi perhaps they can?
     
  18. leo455

    leo455 LAB MAN

    Depends which Pontiac body is used, weight reduction would go along way. 2 different type of Ford 429's. A wedge head (CJ,SCJ),and the Boss head(hemi).
     
  19. Dave Dudek

    Dave Dudek Well-Known Member

    I think a well ported Pontiac head will go high 290ish? That`s with the best of the best porting them..
     
  20. Dave Dudek

    Dave Dudek Well-Known Member

Share This Page