I'm selling what left of my 66 Special parts car w/o motor & trans. The fenders, Quarters, Passenger Door and rear window aria are gone. There are still lots of good parts left. I'll try to list some Parts here or let me know what you need there is many good parts left. Hood- $300 Trunk Deck - $100 Front grill - $85 Head light Bezel's - $75 Head Light Housing - $85 Rear Fender Extensions - $65 Good Front bumper core with surface rust - $100 Front Bench is solid with center arm rests but a ugly purple valor upholstering I would also will take a trade on the Hood or Trunk Deck Lid for a 67 Hood or Trunk. Before Pic's - And after Picks - If you need any Pictures of a specific part just ask. Thanks for Looking Pete
front bumper Pictures I ran out of space on the 1st post strait will need to be re-chromed to be perfect-
I got a guy coming over tomorrow to give me a price on 2 cars for salvage and I'm going to get a price on the 66. There are good parts on this car and I'd rather not junk it so if I'm over priced or some thing let me know I am a motivated (Broke) seller. I'll keep the parts I'v allready taken off. Thanks for looking in
Yep its still there it looks good, I think it will buff out good. I guess $30 obo plus shipping from 33912 Here's a couple pictures and let me know what you think. Thanks
I have it but its in lousy shape, I'll post a picture and see how it looks. Its pitted up pretty good and has paint on it so I guess $10 + sipping if you want it. Let me know. Thanks
hey Pete,if it is not to much trouble,could you get a pic of the rest of the panel between the tail lights? Thanks,Richie
Here ya go Richie- Kind of plain and there's a dent to the right of the key hole, let me know if you need anything els
For my plans,plain is good.I hope I can fix that dent easily.Hard to tell from the pic but I think it will work.:TU:
Hi Pete, I was wondering if you had any outer door handles left in good shape let me know how much.. Do you take PayPal ? Also would you have a brake pedal pin that connects to the brake pedal it has alittle metal clip that holds it in place ..some how i lost mine.
Hi Eric; I have both door handles the driver side is in fair condition and the passenger side is a little rougher, the chrome is solid but had bumps in it I'll post some pictures, your not going to win any shows because of these but they aren't bad ether. I'm guessing $25 plus shipping as for the pin in the brake pedal I'm sure its there I'll see if I can get it out and its yours just pay shipping. Let me know how this sounds. brian; I have to hold off on the steering wheel, my 67's wheel is shot and even though the 66's wheel is different I might still use it, I'll let you know as soon as I quit waffling, sorry.
sounds perfect to me I'm going to have them powder coated anyway So the pits are fine..:TU::TU: Shipping to 11731
Hey ill take that mirror pm me please ---------- Post added at 10:02 PM ---------- Previous post was at 09:57 PM ---------- Also second for steering wheel/horn button pics please
Pete, I will pass on the taillight. Its better than mine... but not much better. Anyway, I remembered another part I need. A fellow up above asked about the pin that connects the brake pedal assembly to the clevis/yoke thing. I need that clevis/yoke thing!
Eric; I'll get back to you when I take them off Thanks ---------- Post added at 10:57 PM ---------- Previous post was at 10:55 PM ---------- Sorry but the core support is sold, I'll get the mirror off in a couple days Thanks ---------- Post added at 11:02 PM ---------- Previous post was at 10:57 PM ---------- Hi Brian; I'm still trying to decide if I'm going to use the wheel in my 67 as the 67 is a mess. I'm just not sure yet if I can live with the difference, if I do sell I'll let you know first. Thanks ---------- Post added at 11:08 PM ---------- Previous post was at 11:02 PM ---------- Mike ; I understand they are kind of rough. Its going to take me a while to get to the brake part the way the car is sitting but I'll get to it and let you know. Thanks