The car is a 340-4bbl bucket console car.This guy looks shiney but its pretty rotten. Post here with wants and I will get back to you with pictures and prices. Buckets are to big to ship unless you can pick em up or have a Canadian shipping addy I can put them on the bus. No fighting over the mirrors:laugh:
Cole, how are the arm rest pads and door panels? The tail light bezels and the truck trim? How much for the dash pad? ---------- Post added 10-24-2012 at 12:05 AM ---------- Previous post was 10-23-2012 at 11:59 PM ---------- I see the drivers arm rest pad is bad but how about the passenger side. It that an FM radio and FM antenna (solid) on the car? Does it work?
I 'm interested in the radio + ant also. Might be interested in the console linkage + shifter, but I think the Shipping will probably be cost prohibitive. Thanks Cole.
Can't tell from the front end picture - is the tri-shield emblem there? If so, condition and price to West Palm Beach, FL 33407.
Interested in seeing some pics of the window cranks. Only if the knobs are tight and not knicked or gouged up. Usually the rears are in better shape. LMK
If there was a bus (or other affordable shipping method) that went from BC to Mesa, AZ I would be all over those bucket seats, just what I need to complete the buckets/console conversion in my 66 Skylark. Rick
Hi Ed The door panels are water damaged, I do have a pair of nice black ones. The arm rest is driver quality at best and the taillight housings have usual pitting the RH even more!
Hi Joe How are you? Sorry,the grill emblem is missing the tri shields ---------- Post added at 02:27 PM ---------- Previous post was at 02:22 PM ---------- Hi Ken I posted a picture of the dash pad, it has a crack though ---------- Post added at 02:28 PM ---------- Previous post was at 02:27 PM ---------- Hi Mike As usual the trunk lid is rusty. Yes the hard part is shipping big pieces south. ---------- Post added at 02:34 PM ---------- Previous post was at 02:28 PM ---------- Hi Rick One way that worked in shipping larger parts into the Us was to use Purolator Courior service. But it worked by having the US customer using their account to pick the parts up from me. I crated the parts(in this case a 67 Skylark hood) supplied them with the shipping demensions and then Purolator picked it up and air freighted it out............Cole
Were you interested in the bare console or complete assembly? The console body is good all around just missing the console door button. The steering wheel is all cracked as they usually are............Cole
Doing pretty good Cole. I hope the same is true for you. Bummer about the emblem. If the shifter and linkage are available let me know.
How much for the steering column shroud? The part where the gear shift lever would be on a non-floor shift car. Thanks,
Hey Cole I am interested in the bumpers, buckets, console possibly front passenger fender. Any small parts I would need to convert a column shift bench car to floor shift buckets. Car in question is a 67 Special. Will that fender crossover or is it a little different? I will PM you my number, Thanks