Billet Heads, Intakes & Accessories

Discussion in 'Our Products' started by ken betts, Sep 30, 2018.

  1. ken betts

    ken betts Well-Known Member

    This year "IS" almost over, that means we need to get our rear ends in gear. We hope to start getting prices and production dates for the cast 455 heads in the next few weeks. We are already going full steam ahead. When we get those prices we will know what a race 350 head will cost, billet and cast.
     
    Julian, 300sbb_overkill and Mart like this.
  2. Mart

    Mart Gold level member

    That could be great news for the new year!
     
  3. BuickGSrules

    BuickGSrules Gold Level Contributor

    I would be in on a stroked SBB too with high rpm - I actually spoke with Gary Paine about doing such one for the street car, and just go some 10´s.
     
    300sbb_overkill and sriley531 like this.
  4. hugger

    hugger Well-Known Member

    Exactly put a G force , Hightower trans or something behind it and raise all kinds of hell
     
  5. JEFF STRUBE

    JEFF STRUBE Well-Known Member

    What is the CSA at the Port Entry.
     
    Julian likes this.
  6. ken betts

    ken betts Well-Known Member

    JW has all the heads, some changes were made early in the project. He would have to post that info.
     
  7. Julian

    Julian Well-Known Member

    What's the update? Anything available for the street?
     
  8. ken betts

    ken betts Well-Known Member

    We are in the process of stocking all motor parts, if anyone wants a specific part we will expedite them. Going to start casting my blocks and heads by end of year. Cranks, Rods, pistons have been ordered
     
  9. Bens99gtp

    Bens99gtp Well-Known Member

    Good news for all waiting
     
  10. hugger

    hugger Well-Known Member

    What cranks are ordered?
     
  11. Bluzilla

    Bluzilla a.k.a. "THE DOCTOR"

    That's Great News Ken! I'll jump in line for Block, Crank, Pistons & Rods order. I sent you mail with this list of items. Will need to get in touch to discuss available parts specifications and pricing.

    Thanks,
    Larry
     
  12. ken betts

    ken betts Well-Known Member

    Billet Cranks, 4.4 stroke, 3.25 mains, 2.2 rods, 8 counterweights under $3,000.00. We can have mains and rods turned for additional stroke or de stroke or SBC Rods, 3.00“mains and balance for additional costs.
     
    300sbb_overkill and Julian like this.
  13. Bens99gtp

    Bens99gtp Well-Known Member

    Nice, something to really keep in mind
     
  14. Julian

    Julian Well-Known Member

    Great deal!
     
  15. hugger

    hugger Well-Known Member

    You planning on keeping a few of them in stock?
     
  16. JESUPERCAT

    JESUPERCAT No Slow Boat

    That is the goal.
    Ken bought a bunch of crankshafts with only 1 crank sold when he gets them.
    If you want a crank give Ken a call as the wait will be short if none at all when they are done.
     
    300sbb_overkill likes this.
  17. 300sbb_overkill

    300sbb_overkill WWG1WGA. MAGA

    Can you alter one of those to fit in a Nailhead?
     
  18. Tom Righter

    Tom Righter Well-Known Member

    I’ll just speak for myself here but I think the most sought after part right now for the Buick big block community is a head with water in it that flows mid 400 cfm out of the box! Enough of buying heads and then turning around and spending a fortune to have them ported and flowed. And then a nice intake to complement their heads where you don’t have to use goofy adapter plates to make them work. Where are we at on this? Last discussions on these from a year ago where we were waiting to put water jackets in those.
     
    Julian likes this.
  19. Julian

    Julian Well-Known Member

    Well said Tom.
     
  20. ken betts

    ken betts Well-Known Member

    Kenne-Bell went the other way for a 397”, I don’t know anyone who has done what your asking. John Everett May have input but we won’t be doing that anytime soon .
     

Share This Page