Drive shaft yoke

Does anyone have a long driveshaft yoke. I believe it's from a mid seventy electra.

 

I'd think I should have one, I'll check tomorrow & let you know.

 

If John doesn’t,I should,or did. I could look this weekend. I think this style is NOT splined to the tip. It starts down in the barrel,yes?

 

I'll check, thanks

 

The splines start right at the end.

 

Thanks John,let me know.

 

Are you sure that it's splined all the way to the front end? All of the long T-400 yokes that I have seen have a smooth inner surface for a couple of inches to seal on an "O"- ring on the output shaft. Can we get a pic of the inside? Thanks, Bob.

 

The longer 7” barrels are not splined to the tip,but the shorter 5.5” ones are.
Gary,
What is the length of the barrel itself?

 

The Nova yoke might have the smaller 1310 joints. The BOP cars have the 3R. Looks like you have two that could possibly work.
If those don’t,I will get mine out.

 

I'll get more pics.

 

That's what I was referring to.

 

I appreciate you guys helping out, heres a couple more.

 

Another.

 

Sorry Gary, I looked, can't believe I don't have any extras.....

 

Thanks john.

 

I will check mine tomorrow. I have some separate and some on shafts.

 

Thanks Brian

 

No match here Gary. These are the two that I found. The longer one is not splined all the way. Actually,if you look,there are less splines in the long one than the short one.

 

I have this one Gary.. Not sure if it's what you're looking for. It's a little under 6" long

 

Thanks for checking