My 66 Skylark - Notched frame for 335 30 20's 7.5 inch backspacing on 12" rim. Front end - Lots of work I cut out the old crossmember some of the frame and modded a Mustang 2 IFS in. Just under 1" narrower track width allowed me to get 285 30 20's under with front 10" wheels. Swapped the rear axle for a stock width Ford 9" for A-body with locker and 31 spline axles. Viking coil overs and my home made support structure Boxed rear and mid frame with additional support from a summit kit. Motor ready to drop in and weld up some new motor mounts. Haven't figured the geometry out yet. Figure I will bolt it up and check drive line and engine then weld her up.
Motor done and timed ready to drop in. I'll upload a pic when I get it in. Dart big "M"632 blown 2xFST 1050'S BDS 12-71 Stage 3. Fully Forged internals Callies Crank, custom JE Pistons, Oliver Rods, Brodix BB3 Xtra O heads w/Inconel valves fully worked up and other stuff with some lemon headers
DAMN A CHEVY!!! you got to watch out here in the Forum ... i dont mind at all.. a blown BBC is just Fantastic....