I am working on running the new fuel lines for my sniper system. Combination of 3/8 in hard line and -6 braided steel lines. My fuel pump an electric EFI MSD. my problem is how to connect either the hard line or the -6 to the pumps 3/8 barbed only fitting. Right now it is going slow, it takes forever to heat the garage warm enough to work in. But as it gets warmer it will go faster. I want to have the wagon to drive to Bowling Green in May. Thanks Tim
I used Russell Performance fittings for 3/8 stainless to AN fittings and had Pegasus make the braided with AN fittings If you want, I can post pics and part numbers. I did both my '64 and '68 from tank to EFI with stainless and braided steel, the same way. I'm using my (hard to do/see anything) phone but can get to my computer later.
Couple options https://www.summitracing.com/parts/...p-wWIjAhKLIGJkf95Xi2Yl6-XHVN0B7xoCT90QAvD_BwE https://www.summitracing.com/parts/...gfRtgXQM3JNxtlF8XNtOg_8J1QqLnhPRoCMCwQAvD_BwE https://www.racetronix.biz/p/adapte...dtgX-0-sWzkSYbFbw4d6NOuwc6FVNyOxoCiFcQAvD_BwE
I dont know if that will work on the barbd that have like 3 or 4 ribs that cut into the rubber....or only work on like the gn quick release style single barb Here says metal or plastic hose barb https://autoplumb.com/products/hose...b19c81250437cd47a2f30330f0ed03551c4efdaf3409e
These style do the gm quick connect https://www.ebay.com/itm/203074625049?chn=ps&_trkparms=ispr=1&amdata=enc:1mDxtuUBQQn2gpeAt-U6xVA2&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=203074625049&targetid=1644837434523&device=m&mktype=&googleloc=9052599&poi=&campaignid=16743749222&mkgroupid=138744546207&rlsatarget=pla-1644837434523&abcId=9300842&merchantid=459454460&gclid=CjwKCAiA0JKfBhBIEiwAPhZXDz7E6SVni3I0rAXU__7d9bTFDPQDcU3-PDszkZbZzGYtjzc52I-nBBoCU0sQAvD_BwE Or a more secure screwed on not plastic quick clip https://www.ebay.com/itm/295465297035?chn=ps&_trkparms=ispr=1&amdata=enc:1RTKKCrOqQ0SuSTFivs69Ow84&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=295465297035&targetid=1644837434523&device=m&mktype=&googleloc=9052599&poi=&campaignid=16743749222&mkgroupid=138744546207&rlsatarget=pla-1644837434523&abcId=9300842&merchantid=108115999&gclid=CjwKCAiA0JKfBhBIEiwAPhZXD2t9ZBYdQrhixnt3uU0G_TsgtPTc30JYW-UtXmhJmXdJsn4-YlsR3hoCikkQAvD_BwE
What brand of braided steel hoses are you using? You can't use one brand of hose and another brand hose end. You can mix and match fittings between brands, but not hose ends. Just go on Summits website and put in hose ends. Then put in the brand. Just keep narrowing down your choices in the menus. Eventually you'll narrow it down to the correct ends. I would highly recommend using PTFE lined hose. It stands up to all fuels and oils.
For hoses, fittings and hose ends you can't go wrong with BMRS. Their hoses are super slick, lightweight and durable but not cheap. Peace, Kacper.