I just bought a nice 60 LeSabre. The previous owner had the torque ball seal replaced about 4 years ago. Within the last year the torque tube started filling with transmission fluid and leaking out a small plug at the rear of the tube. The leak went from a few drops to a pond over the summer of very limited driving. I would assume the Dynaflow has a yoke seal inside the torque ball. Is there anything else I should look at or replace when I am in there? Thanks Carmak Iowa
Replace the Dynaslow with something else! I now have an ST 400 in my ‘60 LeSabre 364 what a difference!