1970 Skylark 2-door hardtop

Discussion in 'Car Part-Outs' started by BrianTrick, Dec 19, 2021.

  1. BrianTrick

    BrianTrick Brian Trick

    Fritz,
    You inquired about this rubber strip. This one is very stiff and stapled on. The other car that I just parted had this fastened with plastic barbed studs.
     

    Attached Files:

  2. Hawken

    Hawken Hawken

    Brian, are you going to BG this year?
     
  3. BrianTrick

    BrianTrick Brian Trick

    I will not be going to BG.
     
  4. Randy Lutz

    Randy Lutz Well-Known Member

    Hi Brian

    Do you have a 70 hood release mechanism with the release rod?

    01Latch_2.jpg

    Cheers
     
  5. BrianTrick

    BrianTrick Brian Trick

    I will see what I have.
     
  6. hugger

    hugger Well-Known Member

    What would you want for the tub?
     
  7. BrianTrick

    BrianTrick Brian Trick

    Make me an offer Ethan. Sure,I can cut it up and make a little more,but then I also have time involved. I still think it’s too nice to cut up.
     
  8. hugger

    hugger Well-Known Member

    Doors available with it or are they spoken for?
     
  9. BrianTrick

    BrianTrick Brian Trick

    Doors are available. Solid but not perfect. I will get pictures.
     
  10. Randy Lutz

    Randy Lutz Well-Known Member

    Any news on the hood release mechanism?
     
  11. BrianTrick

    BrianTrick Brian Trick

    Ok. I am finally getting around to parting and cutting this car up.
    Hawken,
    I have all of your black interior parts removed without issue or damage.
    The driver’s side front fenderwell is good.Two of the pressed square nuts are loose,but I have them.Otherwise,no issues.
    The doors are not perfect,but still pretty good and worth saving.
    Sale pending on rear package tray and rear seat divider.
    I will be sacrificing the 1/4’s to save the trunk drops because they are good and have gotten difficult to find lately. If anyone still needs some 1/4 pieces or sections,let me know.
    I will cut the entire floor out in one-piece. It has a few scaly spots and there are some random drilled holes,but maybe someone can use it. The front torque boxes are good.
    The wiper panel is bad,but the metal dash is good. The roof is good,but the front A-pillars are not. There are other misc bits and pieces on here.
    Eggshells: I can’t believe this shitbox has perfect eggshells. I need to keep these,or at least until I finish some of the interiors in my cars. I am pretty sure I will have some leftover.
    The drip rail moldings have minor dings that can be smoothed out before polishing. There are not mangled.
    Hood latch: I have an assortment that I need to look over. This one was not good.
     
  12. BrianTrick

    BrianTrick Brian Trick

    Hawken,
    Here are the sail panels and the cushion/insulation panels behind them. Very nice originals. Every other pair Inhave ever removed had to go in the trash as they were weathered or junk. I carefully and slowly unbound them from the tack strips and glue. They will need cleaned and possibly re-sprayed,if that’s your preference,but they still had a nice tight/tucked fit.
    I don’t think you needed the rear side panels or arm rests,so here they are for anyone interested. Everything is dirty,but will clean up. The arm rest panels are nice and tight,not wavy or bubbled. The metal frames are perfect,no rust underneath.
    More parts to come.
     

    Attached Files:

  13. BrianTrick

    BrianTrick Brian Trick

    More pictures
     

    Attached Files:

  14. Dano

    Dano Platinum Level Contributor

    I'll take the driprail moldings (all 6 pc.). Can pick them up.
     
  15. Hawken

    Hawken Hawken

    Brian, I am also interested in the rear side panels (upper & lower) - need to get prices from you.
     
  16. BrianTrick

    BrianTrick Brian Trick

    Hawken,
    Here is the windlace. Upper windshield,left & right roof rail,and the rear glass.
     

    Attached Files:

  17. Hawken

    Hawken Hawken

    Sent PM about the windlace.
     
  18. rjm

    rjm Well-Known Member

    Brian, I'm interested in the dash pad. It looked like a a/c car. Do you have that ?
     
  19. BrianTrick

    BrianTrick Brian Trick

    The dash pad in this was junk.
     
  20. Nearing

    Nearing Well-Known Member

    Does the car have the rubber splash shields stapled to the front inner wheel wells?
     

Share This Page